Quantcast
Jump to content

Recommended Posts

Posted

it will not even start when spraying starter fluid in the air box, but it will start if I spray the fluid in the rubber boot after the carb. After it starts, it will run perfect until you shut it off for a while and then it will not start again.

Posted

there's something not right in the kit rebuild, something is still plugged somewhere or the choke is plugged. you really need those garbage bag twist ties to clear all the passages. i know, i had mine apart and put back together 5 or 6 times before i did the twist ties, and after that it worked perfect ... just a suggestion ... can you tell if the bowl is getting gas?

  • 3 weeks later...
Posted

COMPRESSED AIR is your best friend when it comes to carb cleaning. just make certain all the rubber diaphragms and o-rings are out of the carb body before you use it. small parts can almost go into orbit with 100+ psi of air! i also use a spray can of carb or brake cleaner to verify that all of the tiny passages are open. MAKE CERTAIN you wear safety glasses doing that! an eye full of chemicals will feel like your eyeball has 2 foot flames coming out of it. and depending on what it is, possibly even permanent eye damage. DON'T ask me how i know that!

  • 6 years later...
  • 2 months later...
Posted
On 3/31/2019 at 2:28 PM, Ronald van Belkum said:

I thought the battery was bad. got a new one and it still acts like a dead battery. Turns over 1-2 times then click.  I have a 1997 king quad. 350.

Did you check all your electrical contacts from battery terminals to starter?

 

I did that with mine as well as taking the starter apart and cleaning it well.

 

Works like a champ now.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By Brent Wright
      What's a good size to start a 10 year old on?
    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By HeWasRidinDirty
      The one I need to replace has a 2 wire plug coming out of it. Searching eBay I see tons of them with only 1 wire . WTH???

×
×
  • Create New...