Quantcast
Jump to content

Recommended Posts

Posted

My 2005 raptor 350 will not start consistantly, and even harder to start when its warm. When it does start it purrs like a kitten. When it does start it starts right away, very seldomly do you have to crank it over for a few seconds to get it to start. Ive confirmed spark,new spark plug, had my carb gone through and float adjusted and had the valves adjusted with still no consistancy. Only other guess is CDI,Starter relay..... Any help would be greatly appriciated.

Posted

you might have a bad batch of gas, i just had issues with my step sons raptor 350. it would run then wouldn t start. cleaned the tank and carb out . then it would run a couple days then not start. finally got fed up and took it to a shop and it did the same thing for him . finally he figured out that the gas was bad. if the gas sits too long the gas and ethalol separates and sometimes you might end up with all ethanol. try putting new gas in it and make sure you put the ethanol treatment in it. its about $20 a bottle but it worth it. i havn t had a problem with it since.

Posted

Tried everything you all suggested and no leads : ( Even when warm I have spark, but it lead me to wonder. There is spark but how do I know if its enough of a spark. How can I confirm there is enough spark to create ignition?

Posted
Tried everything you all suggested and no leads : ( Even when warm I have spark, but it lead me to wonder. There is spark but how do I know if its enough of a spark. How can I confirm there is enough spark to create ignition?

I know they have spark gap testers for regular autos but i dont see why it cant work on atvs. They usually have them at autoparts stores. It has a screw on one side and you adjust the gap to a preset level according to the instructions. If it wont fire then the spark is weak.

Sent from my SGH-T959V using Xparent Blue Tapatalk 2

  • 3 weeks later...
Posted

Think thats it. I have 90psi comming out of the cylinder when its cold and 85 when its warmed up. So guess next step is a top end. Hope I can just do rings.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Forum Topics

    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By cruteg8
      Does anyone know  the orientation of the bell crank for scrambler 400 2x4 it was not hooked up when I bought quad the way  i put it high goes into reverse and vise versa I flipped it 180 but that put  the shift rod at big angle and it just kinda grinds into gears so dnt think that is right either pretty sure it has to be the exact orientation and the rod adjusted accordingly but I cant seem to find it anyone knows please help 
    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
×
×
  • Create New...