2007 KinRoad ATV Quad 200CC No Spark

[Fordmtrsp]

I have a 2007 KinRoad Quad 200cc ATV.

It was running great and then acted like it

Was flooding out and died. I smelled gas

and the air filter was flooded with gas so

I ordered a new carb, bolted it on....

Nothing!!! pulled plug and no spark so..

I ordered I new coil, CDI box, and plug.

After installing, turned key.. Nothing, still

No spark. So I ordered a new 12 coil stator

and just knew this would fix it, still nothing.

I just checked all my wire connections

and found 2 pins in one of my connectors

wasn't fully seated so fixed that, still nothing,

No spark!!! Help!!! I don't have a wiring diagram

For a Chinese ATV so no sure what else to do,

felling really stupid right now!!!!!

I have a fluke muli meter but not the best

at using it and not sure about where to check and

what input/output values should be coming

from from engine (CG200cc)

[Ajmboy]

Welcome to QUADCRAZY. Did you reach out to them and see if they can send you a wiring diagram? There could be an ignition relay or something or bad ground. I don't think the issue is the carb.

New coil and all and still no spark, could be as simple as a bad ground.

[Fordmtrsp]

Yeah I'm starting to think that it may be

and neutral safety switch or something

Simple because none of this makes sence

To me. I don't have a kill switch like bike because

I have a key switch mounted on fender

and checked it and it's good. Going to start

adding new ground cables to make sure

Frame,engine are grounded good.

Being in the Aerspace field, we have lots

Of that stuff. .

Edited June 4, 2012 by Fordmtrsp

[Fordmtrsp]

Ok, after pulling off the cover of my

200cc (CG200) that houses my Stator,

I noticed there was some light oil inside

there, question is... Is That Normal??

Is it suppose to have some oil in there??

[oxidized_black]

yes its normal to have oil in there. there isnt alot, but there is oil that travels in there ...

[Fordmtrsp]

Oxidized-black, THANKS SO MUCH!! I feel

Alot better about that!!! ). Going to put the

case cover/stator back on tonight and

get back to trouble shooting this crazy thing.

I'm figuring the only reason I'm not getting

spark is either and bad ground or neutral

safety switch, it has to be something simple.

I'll keep y'all posted on the progress.

[wylde1]

I have no luck with electrical issues. It's like you said could be something simple, but tracking it down takes more patience than I ever have. Good luck and keep us posted.

[Fordmtrsp]

I'm not a pro at electrical stuff, just know

enough to be Dangerous..Lol!!!

Thank Gosh I work in the Aerospace industry

and have top notch Avionics Tech to fall back on.

Lol, can into work this morning and had 4 guys

over at my tool box asking me questions about my electrical.

)). Trying to get as many people involved so that

I can get this crap figured out and be able to go

Sling some MUD!!!! ))