Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

oerytb

1993 Yamaha Kodiak - Clutch Problem

Recommended Posts

Hi All,

I have a yamaha kodiak 400 1993 4X4 and I noticed that when I put in into gear the following

happens:

1.the first gear do not fit easily

2. after switch to second gear it goes up to third or fourth i do not know but I am sure is not

second

3.What is the function of the spring in the gears legs?

I request your help understand what ever is wrong with it??

Thanks

Oren

Share this post


Link to post
Share on other sites


there is a clutch adjustment on the throttle side of the bike. looks like a slotted screw and a nut around it. not sure left or right to tighten, but once tight, back off a quarter to half turn ...

this might help you out some too...

1993 - 2005 Yamaha Kodiak YFM 400 Service Manual.pdf

This link is available to logged in members only. Please login or register to view this link.

Share this post


Link to post
Share on other sites


Hi All,

I have looked for the clutch adjustment and couldn't find it:err:.I have attached two side pictures can any one please help me and tell me witch one is it or were to look?

thanks in advanced

Oren

20120922_171930.jpg

20120922_171912.jpg

20120922_171930.jpg.fa1d7e2728303afa330ac5c6a49ce2d5.jpg

20120922_171912.jpg.345e6e2f44186f3fa7ce9d0b1d7a309d.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Pete Barber
      Pull in clutch lever shift into gear and nothing happens ... But When I pull in the clutch lever I hear a clicking sound ... never heard this before ...
    • By Bubba Blaster
      Hi there, new owner to a Bayou 220 and could use some input from those who have owned these. At idle only, I am hearing a distinctly noticeable amount of chatter noise coming from the lower right side of the engine - right in the the clutch housing area. It's like a light clanking sound like something is loose in there. It goes away as soon as you give it throttle. Shifting in and out of gear is smooth and there is no change in the noise if you have it in or out of gear. The clutch doesn't slip at all, it's just that noise. I can also feel it when my hand is on the the clutch housing.
      I just replaced the oil and filter with 10w30 motor oil per spec. Any thoughts?
    • By Reece K.
      I just recently bought a 1994 Yamaha Timberwolf 4x4 from a buddy who had the wheeler sitting in his garage for 7 years. I got it home and fired it up pushed it out of the garage and tried to shift it and it wouldn't shift. First it would click like it was shifting, but the wheeler wouldn't move and when I hit the gas it revved up like I was in nuetral. After trying some more it became stuck in 1st gear and wouldnt shift at all. But it later broke loose agian and acts like it is in neutral again. I took the motor off the machine to make it easier to work on.After asking friends they were convinced it was a clutch problem but after opening up the casing for the clutch I don't see anything out of the ordinary and am concerned that it may be a transmission problem. Any help would be greatly appreciated thank you.
    • Guest Fox300exchic
      By Guest Fox300exchic
      The Hop-Up: You may be saying to yourself, “that’s a chick bike,” and you’re right. But honestly, it’s so much more than that. It’s one badass bike. http://www.quadmagazine.com/quad/features/article/0,24942,1587044,00.html
    • By dirtybear00
      I have a 2000 big bear 400 manual shift. Does not have a shift lever on gender like a Kodiak has left foot operated rn12345 on left foot lever. I replaced the stator and pick up coil and now it is difficult to shift. I marked (indexed) the lever, rod and pivot clamp prior to removal and not sure where to go .  Maybe a clutch adjustment ? Anyone have a manual for this model ? I was sent a manual but it is for a shiftless Kodiak yet it states big bear as well 
  • Recently Browsing   0 members

    No registered users viewing this page.


×