Quantcast
Jump to content

Recommended Posts

Posted

new project just picked up.

2000 sportsman 500

absolutely nothing happens when I turn the key. there is no start button on the left handle bar so im thinking it turns on with the key.

I checked all wires on the CDI and reconnected some wires.

jumped the starter and got good compression. I also bridged the starter solenoid and engine turned.

New ignition switch/key

changed oil

new spark plug

new battery

what else should i check? how do i know is the cdi that needs replacement over the coil, or other things? any way to test that?

are there any wires that absolutely need to be plugged in for the atv to start? there are some wires e.g. 12v outlet wires, ground for the winch etc...

i really dont want to just start buying up parts and replace them..

any help would be appreciated it. thanks.

34rj7fd.jpg

2zp61w7.jpg

sfi82h.jpg

20h91ls.jpg

mli1ch.jpg

34h9l39.jpg

fmv49y.jpg

Posted (edited)

turn on the key so the dash lites up, push up on red switch on left handlebar...thats your starter switch....E GADZ where do all the loose pigtails go? OMG!!!

Edited by cheriah
Posted

when i turn the key to the on position nothing lights up.. no lights, no neutral light, no oil light, no cluster light.

and im pretty sure you cant "push" the red button on the left handle bar.. it looks like it only slides back and forth but from off-run-off.

are you 100% sure i need to push the red button to start it?

turn on the key so the dash lites up, push up on red switch on left handlebar...thats your starter switch....E GADZ where do all the loose pigtails go? OMG!!!
Posted (edited)

yep, im sure its the red one,,,,the yellow button below it is the override, as Oxy said, for the reverse limiter....pm polarisrich and ask him I think he has the same machine or something similar... wish you the best getting all those wires back together...:wink:

Edited by cheriah
  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By RadRob
      I am new to this site. I have a 1987 Suzuki LT230S Quadsport I think. Is there a difference between quadsport and quadrunner?
    • By kawasig
      Hello All
      I'm kinda new to ATVs. I just bought a 1987 Suzuki quad runner 230 Dual Range. I'm having a problem finding info on it. It's very clean, only 2.800 miles. The front wheels are only 30 in.center to center. I was thinking about adding wheel spacers to give it more stability. I realize the added stress on ball joints and bearings. I'm wondering if there are any other concerns? Any input is greatly appreciated!
    • By Frank Angerano
      So I decided to pick up a small trailer if I could get one for the right price.  I found this one for a few hundred bucks on Craig’s list.  It is  a galvanized trailer which is exactly what I was looking for. The wood was shot and needed some minor repairs which I could care less about as long as the chassis was good. 
      I striped it down and put a new deck on. I had some vinyl realtree graphics that I had laying around so I added them to the fenders which I think worked out well. Very happy with this little guy.  
      I'm having the iron workers at my jobmake me up a few lightweight side rails that will have a 22 degree bend in them to accommodate the tires that slightly hang over the edge and will incorporate some tie down points as well. 








    • By Tinkeringreg
      Hi my name is Greg and I just acquired a free 2000 yamaha kodiac 400 4x4 with the ultramatic transmission that does not run. I plan to get it going and use it around my property

    • By kaidella
      Bought 4 wheeler for kids. Used to run and soon as it was put in gear it died. I have put new carburater, new plug and battery. The neutral light won't come on. I replaced the solenoid, then the positive battery cable and today put new relay assembly on. Still no neutral light. Not getting any juice and I don't know why.
×
×
  • Create New...