Quantcast
Jump to content

Recommended Posts

Posted

new project just picked up.

2000 sportsman 500

absolutely nothing happens when I turn the key. there is no start button on the left handle bar so im thinking it turns on with the key.

I checked all wires on the CDI and reconnected some wires.

jumped the starter and got good compression. I also bridged the starter solenoid and engine turned.

New ignition switch/key

changed oil

new spark plug

new battery

what else should i check? how do i know is the cdi that needs replacement over the coil, or other things? any way to test that?

are there any wires that absolutely need to be plugged in for the atv to start? there are some wires e.g. 12v outlet wires, ground for the winch etc...

i really dont want to just start buying up parts and replace them..

any help would be appreciated it. thanks.

34rj7fd.jpg

2zp61w7.jpg

sfi82h.jpg

20h91ls.jpg

mli1ch.jpg

34h9l39.jpg

fmv49y.jpg

Posted (edited)

turn on the key so the dash lites up, push up on red switch on left handlebar...thats your starter switch....E GADZ where do all the loose pigtails go? OMG!!!

Edited by cheriah
Posted

when i turn the key to the on position nothing lights up.. no lights, no neutral light, no oil light, no cluster light.

and im pretty sure you cant "push" the red button on the left handle bar.. it looks like it only slides back and forth but from off-run-off.

are you 100% sure i need to push the red button to start it?

turn on the key so the dash lites up, push up on red switch on left handlebar...thats your starter switch....E GADZ where do all the loose pigtails go? OMG!!!
Posted (edited)

yep, im sure its the red one,,,,the yellow button below it is the override, as Oxy said, for the reverse limiter....pm polarisrich and ask him I think he has the same machine or something similar... wish you the best getting all those wires back together...:wink:

Edited by cheriah
  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By Maxg_57
      Is anyone still active on this club
    • By flyinbrian365
      View File 2018-2019 Polaris Sportsman 850/1000 service manual
      2018-2019 Polaris Sportsman 850 / 1000 – Official service manual Resource
      📌 This thread is dedicated to the factory service manual for the 2018 and 2019 model year Polaris Sportsman 850 and 1000 ATVs.
      What's Covered:
      This service manual covers complete OEM factory procedures for the following models:
      Polaris Sportsman 850 (2018–2019) Polaris Sportsman 1000 (2018–2019) Polaris Sportsman 1000 XE / Trail / High Lifter / Touring variants (where applicable) Manual Contents Include:
      Engine service & specifications (ProStar 850 & 1000 single-cylinder EFI engines) Fuel system diagnostics & EFI troubleshooting Drivetrain, transmission, and AWD service procedures Electrical system schematics & wiring diagrams Suspension, steering, and brake system specs Clutch adjustment, belt service, and CVT procedures Torque specs, fluid capacities, and maintenance schedules Diagnostic trouble codes (DTCs) and service tool usage Intended Audience:
      This resource is for owners, shade-tree mechanics, and professional technicians working on 2018–2019 Sportsman 850/1000 platforms. Whether you're doing routine maintenance, diagnosing a fault code, or tackling a full engine rebuild, this manual has the factory-spec procedures to get it done right.
      Submitter flyinbrian365 Submitted 06/04/2026 Category Polaris ATV  
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
×
×
  • Create New...