Quantcast
Jump to content

Recommended Posts

Posted

Hi folks, I am new to this forum and signed up hoping to get some advice as to what the problem is with the electrics on my timberwolf.

The quad is a 2000 4x4 model, just bought it on the cheap a few weeks ago with electric start and lights not working. The starter makes no noise and no attempt to start whatsoever when the button is pushed and the lights dont work at all. It has a battery that has charge in it, so dont know why it wont just run off the battery, could it be a fuse?

I saw a thread on here about electric start not working on a timberwolf, I got some info from that but think this problem may be different so thought I'd make my own thread.

Any advice would be appreciated

Cheers

Posted

i'd check the fuses, i think it's an inline fuse on that bike. i'd also get a votage meter and get some readings where the current doesn't show up. you could try jumping the starter at the solenoid/starter relay. if you have a meter, you could also test the battery. a bad battery won't make everything work ...

Posted

I'll try get my hands on a meter today and test for current and chceck battery. Though inclined to think its not the battery as I was told it has charge and doesnt even make a clicking sound when pushing starter button. Hope it is the battery though, would make a cheap fix.

Thanks for the reply

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By Jdeaton011989
      Hi all. I have a timberwolf 250 2nd that will not start.. I thought it was out of time bc the guy I got it from said it just quit on him. The tensioner had a nut welded to it and it was like2 teeth off. I installed new tensioner and chain and it still will not start. It has fire and it will not hit off brake cleaner. It has compression. Haven't put a gauge but I'm sure it will crank and run with what it has. I double checked my work and it's still in time. Spot on. Both valves move. I'm about to put a feeler gauge on them and I'll cone back but other than that any ideas?
    • By Brent Wright
      What's a good size to start a 10 year old on?
×
×
  • Create New...