Quantcast
Jump to content

Recommended Posts

Posted

My name is Thomas and I am new to this website. I have a Sportsman 400 and just had a new winch installed on it. battery seemed weak after installing the winch. Replaced battery but will not start at all now. Everything is hooked up right and I had the winch installed professionaly. Do I need to upgrade to a stronger battery ? Or take it back to the shop and have them deal with it ?

Posted

if the bike worked well before the install, i would take it back to the shop myself. it may have been hooked up direct and not thru the ignition, meaning that it will draw 100% of the time instead of just when the key is turned on ...

Posted

Yea I am here this week. Its just the engine turns sounds like it wants to start but just doesnt. At one point it started for a few seconds then cut back out.

Posted

Take it back Tom, but I would just check that the battery terminals are done up nice and tight maybe spray some WD on them and charge the battery for an hour or so but not to long it is a little battery after all:wink: theres nothing like paying good money for a bodgy job:no: Tom will the winch work when the key is in the off position/turned off?

Posted

Ok found it today. I feel so stupid. When I picked it up from the shop they had the fuel reservoir switch on off and I never checked it. Im new to this game. Bought it to plow snow in tite spaces a truck cant get to. Runs like a top now haha.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By Mikey509
      Hey guys, so I've been messing with my quad, and between all the starts, the battery is dead. Is there a certain way to charge these? Can I just throw a trickle charger on it and call it a day? can i also jump it like a normal car with a battery pack or is that to much voltage 
    • By LMI
      Hi all.  New to the forum & quads.  Seems like a great place full of info.
      I just recently picked up a 2005 Suzuki KingQuad LTA700.  I need a battery.  I've been reading up on conventional vs AGM types.  I have a Royal Distributing and Canadian Tire.  RD has 2 types avail for my year/Model a battery YTX16-BS CRANK $75, and BATTERY YTX20CH-BS YUASA $140.  Neither of these is the type from the manual FTZ16-BS.
      from what I can tell... I think the only difference is the capacity with the $75 unit rated at 14 AH/10HR and the $140 unit rated at 18 AH/10HR ... which is the rating in the manual for the FTZ16-BS.  How much does this make a difference for nearly x2 the cost?
      And about the models/type numbers.... what is important to know ... they all end in "-BS" but are the other details relevant or just manufacturer naming?
    • By flyinbrian365
      View File 2018-2019 Polaris Sportsman 850/1000 service manual
      2018-2019 Polaris Sportsman 850 / 1000 – Official service manual Resource
      📌 This thread is dedicated to the factory service manual for the 2018 and 2019 model year Polaris Sportsman 850 and 1000 ATVs.
      What's Covered:
      This service manual covers complete OEM factory procedures for the following models:
      Polaris Sportsman 850 (2018–2019) Polaris Sportsman 1000 (2018–2019) Polaris Sportsman 1000 XE / Trail / High Lifter / Touring variants (where applicable) Manual Contents Include:
      Engine service & specifications (ProStar 850 & 1000 single-cylinder EFI engines) Fuel system diagnostics & EFI troubleshooting Drivetrain, transmission, and AWD service procedures Electrical system schematics & wiring diagrams Suspension, steering, and brake system specs Clutch adjustment, belt service, and CVT procedures Torque specs, fluid capacities, and maintenance schedules Diagnostic trouble codes (DTCs) and service tool usage Intended Audience:
      This resource is for owners, shade-tree mechanics, and professional technicians working on 2018–2019 Sportsman 850/1000 platforms. Whether you're doing routine maintenance, diagnosing a fault code, or tackling a full engine rebuild, this manual has the factory-spec procedures to get it done right.
      Submitter flyinbrian365 Submitted 06/04/2026 Category Polaris ATV  
×
×
  • Create New...