Quantcast
Jump to content

Recommended Posts

Posted

This is a picture of a brand new plug ran one time in the quad (kazuma 50cc) the carb is spotless clean and has new fuel and battery. What could be destroying these plugs. I have the carb adjusted to the 2 full rotation out as suggested by the manufacturer.

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

uploadfromtaptalk1360428926832.jpg

uploadfromtaptalk1360428926832.jpg.438bec86f240428028ac2e9515300698.jpg

Posted
This is a picture of a brand new plug ran one time in the quad (kazuma 50cc) the carb is spotless clean and has new fuel and battery. What could be destroying these plugs. I have the carb adjusted to the 2 full rotation out as suggested by the manufacturer.

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Looks like its runnin rich ! Have U tried rejetting ?

Posted
Looks like its runnin rich ! Have U tried rejetting ?

No just using the ones that it came with

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Posted
No just using the ones that it came with

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

I`d check into rejettin :yes: U said U rotated something out 2 full turns ? what was it A/F screw ? Is the air filter clean ? :confused:

Posted
I`d check into rejettin :yes: U said U rotated something out 2 full turns ? what was it A/F screw ? Is the air filter clean ? :confused:

Yes and yes

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Forum Topics

    • By Joeguy
      I been working on this thing for like 2 months now and it will not run right, is very smokey, and has a pretty loud tap that i think is in the bottom end. Not sure how much the parts are but i will put the time into it if they are pretty cheap. Im not very experienced but going off how the plug looks and the oil on top of the piston i am getting a whole lot of oil coming in from somewhere, not sure if it can come from the valves or if the rings are just shot, my cheap scope cant really see the walls of the cylinder too well.


      20241009_123850.mp4
    • By Bobbles
      Hi all, new to here, looks like a great site. Own two atvs, an at the moment not working honda fourtrax and a yamaha moto4 of some description, trying to work out what model yammy it is.
    • By Dumass
      My name says it all. I have a '03 Honda Sporttrax 400EX with a new aftermarket carb on it that seems to be having issues. I can start it but it idles really rough and when I give it throttle it just kills the engine. I have tried adjusting the idle screw but to no avail. I am in the San Diego Ca area. 
      Any advice will be greatly appreciated. I would also like to get an owners manual for the thing too but can't seem to find a downloadable one.
    • By heath
      i just bought a yamaha moto 4, i have sprayed 'start ya barstard' into the carb and on the spark plug and it doesnt even fire! although when i have the spark plug on the outside of the motor it shows spark, the engine also leaks oil from the starter,
    • By Wam12905
      Hey all!
      I recently acquired an 02 big bear 400 this past summer, carb on it was shot to sh** (pics attached) so my father recommended I just buy a new one off amazon. I purchased the first one that came up as compatible and once it came in, I bolted it in and it fired right up with no noticeable issues. Once I got to the trails with it I realized that on any un-level ground, there's little power output. I checked with 3 different local shops and they all refused to work on tuning up off brand carbs because of how terrible they are. One shop had a motorcycle in with an aftermarket carb and the mechanic said that that would be me if I brought my big bear in. Whoever owned the motorcycle and needed their aftermarket carb tuned up had racked up the bill to nearly $1500. Needless to say he made it clearly obvious that putting any amount of money into an aftermarket carb is not worth it. Now that I've learned all of this, I'm wishing I didn't toss the old carb for a $30 amazon one. In light of this minor f-up does anybody have any recommendations for high quality carbs for my vehicle? I've also attached pictures of the old carb and its condition for your curiosity, although its current condition is likely 6 feet under in a landfill somewhere. 
       
      https://www.ebay.com/itm/283488113569?_skw=Big+Bear+400+Carburetor+Oem&epid=10042848409&itmmeta=01JCDWCTMJX5GBC407RF2PPVDD&hash=item42013553a1:g:INUAAOSwn8llquIL&itmprp=enc%3AAQAJAAABAHoV3kP08IDx%2BKZ9MfhVJKkIMhqd%2Fye0vA0YMR5DUzMoCLl0F9GPNRfuAJKaylVqqyVrZCBJVvXQaPrlosjt%2FZnIHyIRPuGiIbxC9o%2B02UqGA4YqXDyyH4bVebnTPz8P5Elg76CvLdu3KyZgwpgpSeYJK2IOWtlo9vtTld7RVjqPwSv1VF26v6kyXGesAB%2BA%2BCHsj3OnqNrHMyKCBuDMSSvUWvOfq%2BKsZKqyHR7yduef%2BHBlXvfiyRJPThHr7Ge9n%2BHBbuxRCb4oF7%2Fp8oZsvajHy9YDitFRfNJeeAssYbgXuhAc7AVvUZZ2YxKW9GzDdxltLMap8orKJtr%2BIk0SRGQ%3D|tkp%3ABFBMsqqzvONk
      I found this one on EBAY that advertises as a genuine OEM part for a fraction of the $650 that they're normally worth. Any help would be greatly appreciated, thanks!





×
×
  • Create New...