Quantcast
Jump to content

Recommended Posts

Posted

Does a 1999 arctic cat 250 2x4 have a brake light? Reason I ask is I just got one and the brake light wasn't working. I traced the brake switch wire from the hand brake and its not plugged into the harness not could I find a place to plug it into. I'm wondering if it had a brake light or maybe the harness that it plugs into maybe had been ripped off by previous owner. Any help is appreciated.

Posted

dont quote me on this but, im thinking it is just a tail light. i believe brake lights started in the 2000s as a *trail package* add on. i looked online at arctic cat parts, and it seemed to me to be tail light only.

you can pm swampcat07 who might have a better insight on this ...

Posted

Thanks for the response oxidized_black, I did check the bulb and it has 2 filaments and the plug for it has the brake light wire. I ran a hot wire to it just to make sure it worked and it did, Im just confused on the main harness that runs to the front. I cant find a female plug to plug the male plug that's coming from the brake switch. Im gonna tare it down tomorrow and check the whole harness. My guess is its came unplugged and somehow got pulled back under the plastic somewhere, Or it was just a tail light and the brake switch was standard but the light was optional that the 250 didn't have in 1999. Ill update the post when I do the tare down. If I don't find the plug ill contact swampcat07..

Posted

I got a chance to look at this today and I did find the wire that I was missing. it had fell down behind the plastic but I couldn't see it by looking under the fenders. I hooked it up to brake light switch and I now have a brake light.. Maybe this will help someone else along the was.. thanks for all the help..

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By tepin
      Здравствуйте, нужна помощь по ремонту багги Arctic Cat 700 EFI, пропала искра, датчик коленвала импульс есть, Самодиагностика показывает две ошибки AC99,AC96. все провода проверил на целостность, все датчики блоком определяются, не включается топливный насос. Провода от ECU до реле насоса и от реле до насоса исправны. Поставил подменный ECU, ничего не изменилось.   

    • By Shorty51
      Good morning, I am new to the forum. I'm 75 years old and love getting ATVs back to usable condition. I particularly like the 2006-2009 Arctic Cat 250 Utility. I currently own 6. The 2006 I am working on only has reverse and low gear. The "drive shaft" in the transmission is completely stripped where the high gear would mesh. Has anyone on here replaced the shaft. I'm told I have to split the case. I was hoping that someone on here could let me know how hard it will be. I already have it stripped down to where the shaft coming in from the clutch side is the only thing left. I was hoping I could just remove the driven clutch and drive it out from there. Directions say different. Any help would be greatly appreciated.
    • By vaneleus
      I've been hunting for a rebuild kit or aftermarket replacement without success. Any tips? The OEM replacement is too rich for my blood. 
    • By Rockbottom
      Replaced stator now red reverse light stays on in all forward gears and when neutral light in on 
      When put in reverse the light goes out
      any ideas how to correct
      thanks ahead
       
       
×
×
  • Create New...