Quantcast
Jump to content


2006 Yamaha Wolverine - Cold Idle Issues


skeeziix

Recommended Posts

2006 yamaha wolverine 450 carb cold idle issues it stays running when I have the choke up but when I put it back down to idle it wants to stall out. This machine only has 218 miles had has pretty much been sitting for that long lol. Runs great in the warm but is really rough in the cold.

I am going to try to change the gas, new air filter, and spark plugs.

Any and all suggestions are welcome.

Link to comment
Share on other sites

spark plug is a good change, you could add some seafoam, available i think from your napa stores, it will clean the carb without having to take it apart. im sure thats whats wrong with the cold start. you could also put a hotter plug in too, i think yours is an NGK DR8EA, a hotter plug would be DR7EA ... just use it when its cold if you decide and replace it with the summer plug in the warm months

Link to comment
Share on other sites

sounds like ya got it all covered ..lol.. with the newer fuel and all the extra things they have to do to it to cut down on emissions it will start to go bad in as little as 30 days ... especially in small amounts like in out atv tanks .. I always put a fuel stabilizer in mine so that I don't have to remove and clean/rebuild 2 carbs .. its cheap insurance on a good running quad even after sitting for months at a time ...

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By N00bie
      From Arkansas. Just bought a 2012 Gator 850i RSX because I could not pass up the price. BUT it has an idle problem. So, to be honest, I joined just to get a service manual. I have a choice: 1)Buy a hard copy: ~$100; 2)Buy a CD ~$35.00; Get a direct download for free posting 10 times; or get a download for $29.00 (subscription). Haven't decided what to do yet.
    • By McG75
      Sorry I suck at these forums so if you see this submitted under update status, my bad. Anyhow this is a new shock for a 96 Yamaha Kodiak 400 4x4 it fits my 96 Yamaha Timberwolf 250 4x4 perfectly. Little narrower are the bottom than the original but everything else is perfect. I extended it to almost a half in from full extension because I’m pushing 350 pounds.  It rides and hold me well. So if any of y'allRace driven shock. have been looking for one and didn’t want to do the research here it is. 





    • By HSTAR
      Hey I have a 1997 big bear 350 4x4
      I replaced the shifter shaft and the shift arm linkage and the rod when I installed them all I was unaware that you had to line the dot on the shifter shaft with the gap on the linkage arm gap put it all back  together and rode it I can't get it to shift in the right gears  I can move the shift cam by hand and goes in different gears but with the shifter shaft in it riding I can't put it in R or N 
      Anyone know how to line up the shifter shaft and the shift cam s
       
    • By John Sinclair
      I WANTED TO UPGRADE THE CARBURATOR ON MY 1992 BIG BEAR 350, SO I ORDERED A NEW CARB FROM EBAY.  ACCORDING TO THE WRITE-UP IT WAS A GOOD FIT FOR BIG BEARS FROM 1988 TO 1996.  WHEN I REMOVED MY ORIGINAL CARB I NOTICED THAT IT WAS DIFFERENT FROM THE NEW CARB MY CARB HAD TWO THROTTLE  CABLES THE NEW CARB ONLY HAD ONE CABLE.  HOW CAN I MAKE THIS CARB WORK ON MY TWO CABLE THROTTLE?  
    • By McG75
      1996 4x4 Timberwolf rearend width. Can someone with some knowledge of these machines answer this question for me please. Are all 4x4 timberwolves this narrow in the rearend? These tires are so close the right one actually rubs the muffler.  Thinking about seeing if there are any spacers out there for it. I need at least an inch more clearance. 
      .
       
       
×
×
  • Create New...