Quantcast
Jump to content

Recommended Posts

Posted

It has spark, compression, gas, new cdi box, coil, alt, ignition switch but still wont start! The handlebar starter button doesn't work most times. Sprayed starter fluid - still nothing. Shift indicator lights up & horn works. I can't figure out why this just wont start. Any advice and I'm all ears.

Posted

thanks,i will look in to that not to sure how its done I am a hot rod guy not a quad guy how do I find time mark. also a repair book on this and vin.code so I can be sure of what it is.red cat decal on it.

Posted

its probably a meercat ,,, not sure what engine size ...

For Meerkat50-4A, Panda100-4SA, Cougar250-4M

1. For TDC Mark

Looking from the right hand side of the engine casing, the magnet on the crankshaft, which form part of the generator has mark on it. The arrow on the magnet must face the mark on the casing, that is TDC

2. When the piston is TDC, that's ignition timing.

Looking at the camshaft from the front of the engine the following will be seen

( a ) A slot in line with the big hole of the cam gear .

( b ) The two small holes of the cam gear will be flush with the turpet cover seat on the head, the cam lobes are free.

3. The valve clearance

( a ) The Intake valve 0.05 mm

( b ) The Exhaust valve 0.05 mm

  • 2 weeks later...
Posted

Thanks again! Would anyone know what my Kazuma is by these numbers on the engine? #05050887 ans VIN # 095100956. There was a vin code look up at one time but oxidized black. Its not running yet - I need to find time to get working on it. Thanks for your help

  • 4 years later...
  • 1 month later...
Posted

Also, mine was having a hard time starting as well, and I think it was the carb. I put a special cleaner int he gas and I think it knocked loose some crap. So im cleaning the carb to see it thats the problem. If I cant clean the carb im buying a new one.

Heres the link: https://www.ebay.com/i/182215680083?chn=ps

 

Hope this helps

  • 3 years later...
Posted

Is there sort of a one stop shopping website that has all things Kazuma available for purchase?  Also,  I think I have the falcon 110.  Does anyone have any suggestions for inexpensive tire suppliers?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Forum Topics

    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By 88bigbear
      Bought a 88 big bear 350 4x4 took it for a run and lost spark, found it was stator so I replaced that then took it for a long run and it sat for 2 days and no spark again, this time stator tests good on ohms and voltage for source and pick up coils so I started replacing things including regulator, ignition, ignition coil and plug cap, spark plug and everything tests great including all safety switches until the orange wire for ignition coil from the cdi it only reads 3 volts so I replaced the cdi and still 3 volts, any ideas??
    • By cfherrman
      Fixing for a friend. Atv was at a different friends house to be fixed and he rebuilt the carb and had it running nice, then it shut off and no more. He replaced the key and the coil.
       
      So he got busy, so I am helping, I checked the wiring from the stator to the cdi, and from the cdi to the coil. All is good. I checked resistance on the pickup coil, good, and on the source coil, open. I buy a new stator (China) and the 4 prong plug only has 3 wires in it while mine has all 4. I checked resistance in the source coil and it's in the 300's. I pulled one of the old pickup wires out of the old stator and wire it in the new one. Still no spark.
       
      Why do the wires differ, I checked the VIN again and it's "J" for the year and I got a 1988 stator. Please help!
    • By LashinWheeler
      Hello all, I have a 2006 Polaris Sawtooth with no spark. It has a dead battery but with a jump pack on it, it will still not Spark. Plug is good, Throttle ETC is not closed, Stator pick up coil seems to Ohm out in the correct range, Unsure how to properly check the CDI. And when ignition is on the Neutral and reverse light come on but after cranking just the neutral stays on. 
       
      Any help would be great,
       
      Thanks!
    • By logray
      Hi all, 

      I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear). 

×
×
  • Create New...