Quantcast
Jump to content


Kazuma - Will Not Start


lomafa

Recommended Posts

It has spark, compression, gas, new cdi box, coil, alt, ignition switch but still wont start! The handlebar starter button doesn't work most times. Sprayed starter fluid - still nothing. Shift indicator lights up & horn works. I can't figure out why this just wont start. Any advice and I'm all ears.

Link to comment
Share on other sites

its probably a meercat ,,, not sure what engine size ...

For Meerkat50-4A, Panda100-4SA, Cougar250-4M

1. For TDC Mark

Looking from the right hand side of the engine casing, the magnet on the crankshaft, which form part of the generator has mark on it. The arrow on the magnet must face the mark on the casing, that is TDC

2. When the piston is TDC, that's ignition timing.

Looking at the camshaft from the front of the engine the following will be seen

( a ) A slot in line with the big hole of the cam gear .

( b ) The two small holes of the cam gear will be flush with the turpet cover seat on the head, the cam lobes are free.

3. The valve clearance

( a ) The Intake valve 0.05 mm

( b ) The Exhaust valve 0.05 mm

Link to comment
Share on other sites

  • 2 weeks later...
  • 4 years later...
  • 1 month later...

Also, mine was having a hard time starting as well, and I think it was the carb. I put a special cleaner int he gas and I think it knocked loose some crap. So im cleaning the carb to see it thats the problem. If I cant clean the carb im buying a new one.

Heres the link: https://www.ebay.com/i/182215680083?chn=ps

 

Hope this helps

Link to comment
Share on other sites

  • 3 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By newguy024
      Just got into ATV riding just last week, never had much money so i couldnt afford to buy anthing, so now at the age of 34 i just bought a 1987 suzuki quadrunner 300 for 500$ took it out a few times and what a rush of excitement to go through that first mudhole haha!
    • By justent_88
      Hello, im looking for some input on this situation i have. My 94 Mojave has no spark, and i have no idea what it is. Ive replaced/tested the magneto, the pickup coil, cdi, the ignition coil. Even the key and Killswitch. I haven't tested the harness its self, but i have tried another harness and still nothing. The only thing i can think of is the fly wheel itself. I have found a lot of metal shavings in the fly wheel and have cleaned it the best I could. But nothing happened afterwards. I am truly stumped here and hoping some of yous could shed some knowledge/ideas that could help get this thing to fire. 
    • By HSTAR
      Hey I have a 1997 big bear 350 4x4
      I replaced the shifter shaft and the shift arm linkage and the rod when I installed them all I was unaware that you had to line the dot on the shifter shaft with the gap on the linkage arm gap put it all back  together and rode it I can't get it to shift in the right gears  I can move the shift cam by hand and goes in different gears but with the shifter shaft in it riding I can't put it in R or N 
      Anyone know how to line up the shifter shaft and the shift cam s
       
    • By HoldenBoy
      Hi all,
      Looking for some help on a starter/bendix issue. Can Am outlander 450 2017. While cranking to start, the starter spins and engages into the ring gear. After a few seconds the bendix retracts while still spinning and there is no damaged teeth on the drive pulley.
    • By Mhatayas
      My uncle bought a Baja 250, 2006. Knew there was no spark since the get go. He don't know anything about quads so is getting me to help him try to get it running...
       
      battery is bad so I connected battery charger to it to crank it over , cranks over well , but no spark .... 
      Lights and everything work fine , but with each crank over using the e start switch , the display reads 999 888 777 666 ... Right down to 000 and repeats itself . 
       
      He managed to get a parts bike , I changed over the CDI and the coil and the stator from the parts bike and there was another black box by the voltage regulator I changed over ... I used my multimeter to confirm as much as I could works , it's hard without knowing which wires are which , and I cannot find any diagrams online for this bike ? 
       
      Do you think it could be the Killswitch? There's so many wires coming from there I don't know where to start . Also I should mention it appears the fan on the front of the bike has been taken off (the wires have been cut too ) 
       
      If this bike sparked it would run . The previous owner said he parked it one day and it just wouldn't start after.
×
×
  • Create New...