Quantcast
Jump to content

Recommended Posts

Posted

I got a 1994 yamaha timberwolf that 2 years ago i bought put carb on off a parts one had it running but not the best so i rebuilt the carb seemed to run good then i left it sit i wanted to ride it so,i took carb apart to clean it looked good had it running but wouldn't idle not a big deal then it died so i gave up on now trying to start wont do anything i checked spark looks good, has great compression and its getting gas i sprayed starter fluid in it and it still wont do anything what the heck could be wrong?

Posted

the stator makes the spark, it is inside the cover by your left foot sitting on the bike, it is an easy fix, the spark being white is weak, if changed it will be blue. stator and pick up coil are sold together, both inside the cover, you might be able to buy just the pick up coil and try that, sometimes that is all that goes on them ...

Posted (edited)

I looked i can get one from any where for the same price i got two more timberwolfs the same year the one i ran it to the ground it ran but cam chain stretched and i never had to replace stator and the other one looked like a new machine when i got it iv had great luck with that one

Edited by Bigal700
Posted

Ok i pulled stator out of parts machine and i pulled carb from one i have that runs good but as soon as it gets warm it dies i thought maybe something wrong with carb when i pulled it so i took it off myn and put it back on running one and that one ran great so there's something still wrong with myn wat could it be?

Posted

Ok now i pulled stator out of my junk wheeler that run but cam chain stretched on and i pull carb off of my running timberwolf and it idles and revs up but once it gets warm it dies and wont start again what could this be? Its not carb pulled it back off myn put it on running wheeler and it runs great so something is still wrong with myn

  • 4 weeks later...
Posted

fuel tank vapor lock? is tank clean and is vent out of top of gas cap clear? my lt160 did same and that was the issue. also check vacuum lines from carb to airbox and motor.

  • 5 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Randel1
      I recently read an article about restoring or at least improving the looks of faded and discolored plastic body parts. In the article it suggested using a 50/50 mixture of boiled linseed oil and paint thinner. You mix it up and apply it with a brush or rag to rub it in and remove the oxidation. I curious to find out if anyone has had experience with doing this and what was their short/long term results of doing so. I would hate to try it and find out that a few weeks/months down the road my plastic body parts self destruct.   
    • By BuckBilly
      Good morning to all !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
      Let's see if we can make this a daily event.
    • By kawasig
      Hello All
      I'm kinda new to ATVs. I just bought a 1987 Suzuki quad runner 230 Dual Range. I'm having a problem finding info on it. It's very clean, only 2.800 miles. The front wheels are only 30 in.center to center. I was thinking about adding wheel spacers to give it more stability. I realize the added stress on ball joints and bearings. I'm wondering if there are any other concerns? Any input is greatly appreciated!
    • By Tim Keiper
      1st problem, Does anyone know where I can find a stock carb for my Timberwolf, I have tried two different aftermarket carbs and they both suck. The machine runs great until it gets good and warm, then it keeps stalling unless I feather the throttle. it will even stall while I'm trying to go from 1st to reverse or vise versa. I took it to a buddy of mine who is a bike mechanic for years, and he told me try to find a factory carb. When I look online from dealers it says "NOT AVAILABLE" anyone have any suggestions ?
       
      2nd, The small tab on the rear axle for towing is to short for even pulling my small yard trailer, I can't even turn a little bit and hit hits. I tried making an extension which worked great as far as length, but it bends the tab and then the extension drags the ground. I have an idea of what to do to fix it, but wanted to see if anyone else has had this problem and see how you solved it.
    • By Ajmboy
      So we are almost a month into winter and I've been so busy working on my house that up until today, I didn't realize that we just haven;t gotten any real snow yet to warrant putting the plow on my grizzly. So that got me thinking, what are the latest plows out there and what ATV plows are the best? I've got 2 snow plows for my grizzly, a quadboss pile driver atv plow set up and a snowsport ATV plow. They are both a bit dated now and I tend to stick with the snowsport due to ease of use and I just like it so much. So if you have a plow on your ATV, please let us know what it is and post a picture with your atv/plow would be awesome. Would also like to know what you like and dislike about it.
      This is back a while when I did a write up on these 2 plows.... in 2009 I got the snowsport and in 2012 I got the quadboss.
       
×
×
  • Create New...