Leaderboard

The fan gets switched on when the oil temperature gets high. The fuel pump gets turned on when you first turn the key but then switches off unless it's getting a pulse from the cdi. The pulse from the cdi is the same pulse that fires the ignition coil, so if you have spark, you have the required pulse to operate the fuel pump relay, you just need to ensure it's getting to the pump control relay. When wires have no continuity, or have high resistance, it's almost right at the end of the wire where it crimps into the metal terminal, it either corrodes or breaks the wires inside the insulation. Wires do sometimes break if they have been chafing for a long time on something and worn right through the electrical tape, insulation, and then the copper wire, but that's easy to spot by the frayed insulation.