Quantcast
Jump to content

  • Do you own an ATV, UTV or SxS? Join our Community Forum!

    QUADCRAZY ATV Community and Forum are FREE to join! We keep our ATV, UTV, and SxS forums clean and user friendly. All first time posters in our forums will have to wait to have their content reviewed and approved. Once your first ten posts are approved, you will no longer need to go through a forum post approval process. To bypass the approval process with immediate access and a NO ADS experience in our ATV, SxS, and UTV forums, consider subsribing to a Premium Membership

Ranger RZR Shift issues


Phoneman2

Recommended Posts

I just wanted to let other RZR Owners know about a problem with the Ranger Razor Shifting. When I got my RZR, I found that the transmission wouldn't go into High unless you held the shift lever back and gave it some gas. It also has to be pushed forward and rocked to get it into Park... Not good. I took it to the Polaris Dealer and they adjusted the shift cable which didn't help, and they told me it was something I would have to live with. Well, my factory warranty was going to expire in about four days so I took it to another Dealer in St Helens, Oregon. They tried to adjust the cable too, but said it might take a while for me to get it back if they had to remove the transmission to check it out. Well it turns out the detend arm that makes the tranny click as it goes from gear to gear has a ball bearing with a spring behind it. The ball bearing makes the actual click as it goes throught the detent notches. The spring behind the Ball bearing was bent or squished about 1/4th of an inch so it wasn't making the tranny go into the end detents (Park, and High). They ordered the new spring, but called me a few days later saying the part was on backorder. This tells me there are a few RZR's out there with this same problem. So anyone having this issue should get it fixed before the Warranty expires, or at least be able to know there is a way to fix it.

I hope this helps fellow RZR owners.

Phoneman2

UPDATE. The Polaris Dealership called and informed me that the spring came in, and they installed it, but it did not fix the problem. They are going through the Transmission and should have answers for me very soon.

Stand by.

ok, I got it back a few weeks ago and finally had a chance to try it out. The Dealership "Columbia Honda Suzuki Polaris" in St Helens Oregon did a fantastic job. The problem with the shifting and park seemed to be the Gears. They were designed wrong and wouldn't mesh correctly. The old gear has the mating surface at 90 degrees, and the new gear has the mating surfaces at an angle so the gears could actually mesh and go into gear without revving the engine or rocking the RZR back and forth. They had the RZR for over a month and a half, but that's because they waited on parts forever. I highly recommend anyone looking for a great dealership to do buisness with, check them out. I am buying my next Off Road Vehicle from them.

Thanks for your time.

Edited by Phoneman2
Update
Link to comment
Share on other sites

  • 8 years later...
On 10/7/2008 at 11:52 PM, Phoneman2 said:

I just wanted to let other RZR Owners know about a problem with the Ranger Razor Shifting. When I got my RZR, I found that the transmission wouldn't go into High unless you held the shift lever back and gave it some gas. It also has to be pushed forward and rocked to get it into Park... Not good. I took it to the Polaris Dealer and they adjusted the shift cable which didn't help, and they told me it was something I would have to live with. Well, my factory warranty was going to expire in about four days so I took it to another Dealer in St Helens, Oregon. They tried to adjust the cable too, but said it might take a while for me to get it back if they had to remove the transmission to check it out. Well it turns out the detend arm that makes the tranny click as it goes from gear to gear has a ball bearing with a spring behind it. The ball bearing makes the actual click as it goes throught the detent notches. The spring behind the Ball bearing was bent or squished about 1/4th of an inch so it wasn't making the tranny go into the end detents (Park, and High). They ordered the new spring, but called me a few days later saying the part was on backorder. This tells me there are a few RZR's out there with this same problem. So anyone having this issue should get it fixed before the Warranty expires, or at least be able to know there is a way to fix it.

I hope this helps fellow RZR owners.

Phoneman2

UPDATE. The Polaris Dealership called and informed me that the spring came in, and they installed it, but it did not fix the problem. They are going through the Transmission and should have answers for me very soon.

Stand by.

ok, I got it back a few weeks ago and finally had a chance to try it out. The Dealership "Columbia Honda Suzuki Polaris" in St Helens Oregon did a fantastic job. The problem with the shifting and park seemed to be the Gears. They were designed wrong and wouldn't mesh correctly. The old gear has the mating surface at 90 degrees, and the new gear has the mating surfaces at an angle so the gears could actually mesh and go into gear without revving the engine or rocking the RZR back and forth. They had the RZR for over a month and a half, but that's because they waited on parts forever. I highly recommend anyone looking for a great dealership to do buisness with, check them out. I am buying my next Off Road Vehicle from them.

Thanks for your time.

Do u have part numbers for gears they changed or pics? Thank you

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By HSTAR
      Hey I have a 1997 big bear 350 4x4
      I replaced the shifter shaft and the shift arm linkage and the rod when I installed them all I was unaware that you had to line the dot on the shifter shaft with the gap on the linkage arm gap put it all back  together and rode it I can't get it to shift in the right gears  I can move the shift cam by hand and goes in different gears but with the shifter shaft in it riding I can't put it in R or N 
      Anyone know how to line up the shifter shaft and the shift cam s
       
    • By Clydaho
      2022 Sector 550, 414 miles on it and the gas gauge reads empty.  I topped off the gas and it didn't change.
      There is no fuse that I could find.  No access at the gauge cluster.
      Wiring on the top of the tank looks good, properly connected.
      Could the sending unit in the tank be stuck or broken?
      Has anybody removed the tank lid?  Any tricks?  
      Any other ideas?
      Thanks for any help,
      Clyde
    • By Suzukiquad
      I just bought two 2002 Suzuki LT80K. Do I need to mix the gas or use straight unleaded?
    • By Mikey69
      Heres my story. Kinda long. I guess I was a late bloomer when it comes to quads. I had never ridden a quad in my life. Rode Dirt Bikes as a kid growing up. Back in Oct of '06 I found a Mustang on craigslist. Took it for a test drive one morning before work. Fast car. 351 Cleveland. I had planned on meeting the guy again after work. For some strange reason thats still to this day beyond me, I stopped in Hillsboro MotoSports on the way home from work. I had 6 Grand on me. There was a left over '05 sitting by the front door. It was on sale for $4999. It was $5499 OTD. I didnt even look at anything else. I knew nothing about quads accept I thought it really looked coool and I had the money in my pocket to buy it. I was sitting on it when the salesman walked up and asked... "Can I help you?" Without hestitation I pulled 60 Ben Franklins outta my front pocket and said "I want this Quad. Load it up in my truck." It was just about dark by the time I drove away from the shop. BTW, I didnt bother to ask my ol lady if I could buy it. LOL. Anyway, I took it by the house and showed her. She was kinda stunned but not mad. We drove over to a friend of mines house and unloaded it. I took it to the field across the street from his house. HOLY CHIT!!!!! I was surprised by the power. I had it for about 2 weeks and took it to Sand Lake. I was there a few hours and rolled it on a banked turn at the top of the bowl right before you get to the one-ways. When it rolled, I flew off and landed on my belly. The quad came bouncing and landed on my back. For a month I couldnt even walk. I was scared of it. I considered trading it for a 250EX. Went back to the shop. The salesman said..."Dude!!! You dont want a 250EX!!! Trust me. Just get used to it" I still wasnt convinced. I put it on craigslist for $4000. Calls were coming in. I had a guy that wanted to come look at it that evening. I decided to take it for one last ride at Browns Camp before I sold it. I was still afraid of it. After about 5 minutes I started feeling comfortable on it again. I decided right then, I loved my Honda 450 and would learn how to ride it instead of selling it. That was late Nov of '06. Work was slow for a Painter in Oregon. My new job everyday? Going to Browns Camp and ridding my Quad. I bought my Girl Friend an '02 Blaster. I rode my 450 for 4-6 hours almost every single day for 3 months. And yes, I know my way around Browns Camp pretty well. LOL. In March I bought her an '06 TRX250EX (Thank God I didnt trade my 450 for one of those) LOL Since then, I have become totally addicted to quads. I love them. Couldnt imagine not owning at least one quad. Luckily I have two. My "07 was $6500 OTD in July of '07. Bought it for my Girlfriend. Traded in her 250 EX. A month later we broke up. So, I wound up with two Honda 450's.
       
    • By Sofaspud
      My 2008 can-am Outlander 800r is having hard shifting issues. Does anyone have a fix for this ?
  • Similar Tagged Forum Content

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...