Quantcast
Jump to content

First Quad...First Project

trailblazer_02
 Share

Recommended Posts

trailblazer_02 Experienced

trailblazer_02

Posted
  • Author
Posted

lol no. but my mom is only making me pay for the seat cover...

the decals were like 25?

for one silver flames..lime green polaris decal..like 3 monster stickers..cuz i dont have a lot now..and one warning sticker that says NO PASSANGERS..(unless you have big boobs)

hahaha

as you can see i changed up the decals a little...well a lot.

lol

outlander560 Mentor

outlander560

Posted
Posted
ive heard on alot of different different forums that k&n lets in wayyyy to much dirt and crap. ive always ran stock filter but if i ever upgrade filters then itll be a uni after hearing over 10 people say that it lets in too much junk

well i do i agree it lets in to much crap but there are prefilters that r way easier to clean(soap and water) and it stops all kinds of junk like dust from going into ur k&n filter. there are also other filters that have a similar design to k&n that dont need to be oiled, i think there was a forum on that.

trailblazer_02 Experienced

trailblazer_02

Posted
  • Author
Posted

well i just got back from my dads friend leonards house.

he is a painter.

so we got the main pieces silver metallic like and the front nose piece gloss black. and the rims gloss black.

its really wet out here so we are going to let them sit this weekend and start putting things back together this monday.

im exhausted.

we did a lot in a short time.

hope to hear things.

Roody Enthusiast

Roody

Posted
Posted

Awesome, can't wait to see it! It's really cool that you're spending so much time on this quad. I definitely think that this will all pay off in the long run and in the future you will have a much better sense of working on quads.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Similar Forum Topics

    • realpilot
      1999 Ranger 6x6 no start
      By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • LashinWheeler
      2006 Polaris Sawtooth No Spark
      By LashinWheeler
      Hello all, I have a 2006 Polaris Sawtooth with no spark. It has a dead battery but with a jump pack on it, it will still not Spark. Plug is good, Throttle ETC is not closed, Stator pick up coil seems to Ohm out in the correct range, Unsure how to properly check the CDI. And when ignition is on the Neutral and reverse light come on but after cranking just the neutral stays on. 
       
      Any help would be great,
       
      Thanks!
    • mehim
      NSFW / Looking for fun ideas for our 2nd Quad Runners event at our nudist campground
      By mehim
      Hi everyone and thanks for reading. 
      My husband and me are getting ready to host the 2nd Quad Runners event at our nudist campground. The first one (last year) went pretty well with about 20 quads attending and have to say, it was a smaller group, but they made up for their size with the large interest in partying and there was plenty of nudity as the Saturday night went on. 
      We have decided to host another one this summer, but we are looking for some fun (but safe) riding events. Our grounds are almost all flat and remember we are a nudist campground so many of us are bare as* naked so "slow ride" events would be the best. 
      Give us your thoughts and ideas and feel free to ask us anything you would like, and we will answer right here in the thread. 
      Thanks for your help and ride safe. 
      BTW, let us know what "anything goes" means for this thread section. 

    • logray
      Looking for Quadrunner Flywheel Starter Clutch Gear race diameter
      By logray
      Hi all, 

      I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear). 

    • OldATVowner
      99 Bear tracker no neutral or reverse light or start button
      By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...