Quantcast
Jump to content

Recommended Posts

Posted

i have a drx 90 air cooled and when my son takes off it goes fast and then when he lets off the gas and presses again it bogs down really bad. we tried changing jets going up and down and a few other things but nothing seems to work.

Posted
i have a drx 90 air cooled and when my son takes off it goes fast and then when he lets off the gas and presses again it bogs down really bad. we tried changing jets going up and down and a few other things but nothing seems to work.

Before you Changed Jets did you do a PLUG CHOP and Read the Plug to determine you need to Screw with the jets????

How is your needle Setting????

Did this Happen all of the Sudden or has this been an ongoing Problem???

Do you have Aftermarket Pipe??

How is the Air Filter????

Fuel Filter???

Air in the tires???

When you modded the motor,,,Exactly what else did you do....In other words.....I want to know EVERYTHING you have done to the Bike....and Be Weary,,,,,You cannot JET a bike on the Internet....:huh:

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By oztrax
      was thinking most of us on this forum would have another ride, so to get the ball rolling...........
      MY MAX 4 6X6 2009, now this will actually go anywhere including across the water. In the 3rd photo I had gone up the river about 30 meters then climbed up the bank, 6X6 owners call it "swimming" 
      MAX 4 6X6 2008 
    • By shorty
      So now this "new to me" Kowhockey has ANOTHER problem. Replacing the rectifier cured the charging problem, rode around for a while, Yahoo!.. but this morning it wouldn't start, hmm 🤔 checking for spark, nuttin.. CDI igniter module bad. It's not the coil because when the key is turned off the spark knocks me down. Glad I got this old quad cheap because I'm replacing lots of electrical parts. Also found 3 blown fuses in the toolkit. 😭
    • By That229Yamaha
      Hey guys, I’m new to the forum. What I got is a 2001 Yamaha Bear Tracker 250, got it as a project on trade and the problem I’m dealing with is a “no spark” problem and been trying to hunt down the cause for two weeks. I’ve replaced the stator, pick up coil, CDI, wiring harness, ignition, coil pack, spark plug, solenoid, battery, etc. and I’m still not getting any luck. Even tried bypassing the kill switch. I also noticed two things on this quad, another CDI under the back plastic by the voltage regulator, and a blue and green wire coming from the motor behind  the foot shift, tried to hook it up but it broke off and I’m thinking the broken wire would cause it to have no spark, if not then I need someone’s help on this and wanna see if I can get spark again. If anyone knows why I have this problem, the help would be greatly appreciated.
    • By Whiterabbit
      Hey all, from SW Virginia here. I just picked up a '01 Bombardier Quest 650 on the cheap (seller couldn't get it to start). After correctly plumbing the fuel pump (new pump the prior owner installed but had the hoses going backwards lol) and cleaning the carb and fuel tank, repaired all the batt - and batt+ connections she lives!!  I had swore to the wife unit I wouldn't be dragging another "project" home but I couldn't pass it up, it had new tires, new starter, new fuel pump and low hrs. All's good after she took it for a ride! 😆 It rides like a tank, very stable and tons of power.
    • By JoeB
      Considering pulling the pin on an ARGO xplorer 570 xrt 2 up unit. Has anyone had any experience with these. They offer a pretty good sounding warranty but I don't know anyone who's got one to know if they're good about following through on their warranty promises
×
×
  • Create New...