Quantcast
Jump to content

Recommended Posts

Posted

i have a 2012 cf moto x5 and our village made atvs road legal and im interested in putting reverse lights on it, is there some way to wire it to the shifter or would it be better to wire them to a momentary switch  like a horn button?

Posted

Most of these bikes have a reverse switch on the shifter side of the engine. You should find two wires that come out of the engine near the shifter.  One is usually a neutral safety switch that indicates the bike is in neutral and is clear to start.  The other is a reverse light wire that shows you on the dash that the bike is in reverse like @06kfx440 mentioned. 

When you put the bike in reverse that switch is grounding the reverse light and makes it come on.   So in theory all you would have to do is wire a reverse light as so, positive wire connected to the battery with an in-line fuse (must have for protection) and then attach the ground wire from the light to that reverse light wire coming from your neutral safety/reverse light switch.   Of course you would have to look at your bike to make sure it works the way I’m stating or your manual to show what wire to connect to but a tester can do that for you also.  But each manufacturer is different but mostly all of them use the grounding type system.

I agree with @06kfx440 about tapping your dash light but most of those indicator lights are super low amperage and may not carry the load of another light on the line.    

 

  • Admin changed the title to 2012 CFMOTO X5 Reverse Lights
Posted

@06kfx440 great idea, didnt even think of that, we had to make our atvs legal with all kinds of things. shame mine didnt come with turn signals! so i believe i will pull the dash and tap into the reverse indicator and o to a relay to feed the light, many thanks guys!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By hengstserepair
      Howdy ya'll. I am working ona 2000 Yamaha Breeze 125. It was in rought shape when I received it and I am working through issues as they pop up. The quad had been sitting for years. I was able to get her running again, but I need your help with the following issue:
      I don't trust the transmission yet and I don't want to make problems any worse. So, I haven't pushed things hard at all. Low rpms, less than 5mph in reverse.

      Nuetral: Runs as expected
      Reverse: She seems to be driving fine at slow speeds. Going into reverse at idle is fine, coming out of reverse back into neutral won't work (the shifter is just stuck). As soon as I turn off the quad, I am able to shift around without any issue.
      Forward: It slips. It seems to only transfer power to the wheels on a smooth surface and going slightly downhill. When shifting into forward at idle, there is a clacking sounds during the transition. Shifting back to nuetral works just fine.

      Other Notable Symptoms: There was old oil in the vbelt and when I was tuning the carb, it starting blowing out of the CVT cooling vent at the front of the quad. Made quite a mess. There is positive crankcase pressure due to piston blowby, that I have not decided whether or not I am going to fix (customer budget dependant).  Since the oil was old, much darker than the new oil that is in the crankcase, I am thinking it seeped past a bad seal while it was sitting for years. The oil that was in it when I first got it had gas in it.

      Thoughts: I am thinking maybe there is an issue with the clutch. I worry about the old oil intermingling with the dry centrifugal clutch. I was thinking my next step would be to take the cover off of the clutch and inspect it.

      Let me know what you all think. Any advice and ideas is greatly appreciated. This is only the 3rd quad I have worked on and I have a lot to learn.

      Lorne
    • By prdicon
      I was looking to buy a new ATV. 
      I was debating between Polaris sportsman 450 and Honda rancher.
      Polaris it a bit cheaper.
      But can you tell me which one will have more demand on the used market? Which one will keep it's value better?
       
      Let's say 3-5 years from now.
    • By sandman001
      This 2006 ArticCat dvx400 didn't have a reverse cable. I got one and am wondering how it routes? If someone has a dvx400, could post a pic of there reverse cable routing, it would be greatly appreciated. Thanks
    • By Rockbottom
      Replaced stator now red reverse light stays on in all forward gears and when neutral light in on 
      When put in reverse the light goes out
      any ideas how to correct
      thanks ahead
       
       
    • By Adamb2025
      I have a 1990 Honda fourtrax 300 2x4
      I rode the other day for 30-45 min. Switched it off and now it is completely dead..
      battery is fully charged, fuses are good . WILL NOT TURN OVER ,
      headlights won't turn on , No neutral, reverse or oil temp lights . Electrically it is completely dead !!! I replaced the key switch and CDI box , STILL NOTHING.
      I bypassed the neutral safety switch and grounded it to the battery and still nothing !! I used a jumper wire on the starter Solenoid , the motor will turn over but not start . I even bypassed both fuses and straight wired it to see if I could get a neutral light or headlights still nothing . What could it be ?
×
×
  • Create New...