Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

YamahaGrizzly

2016 Yamaha Grizzly 700 Blown Up Transmission

Recommended Posts

not sure where to post this but,

 

I have a 2016 yamaha grizzly 700 with a blown up transmission (again).

 

I was wondering if a 2015 Yamaha grizzly 700 Main drive transmission shaft and gears shift drum will fit on my 2016?

Share this post


Link to post
Share on other sites


Your best bet would be to look up the parts and compare the part number on any of the parts web sites. Best bet. @Ajmboy knows some of the parts places that list the parts by numbers   Maybe he can chime in and point you in the right direction. 

Also take a look (long shot) but look on eBay for that parts for both years and screen shot the patsy and compare  or down load the manuals here and compare parts  from the manual. It may take time but worth it. 

Lastly I would call a Yamaha dealer ask for the parts dept and ask them to run the part numbers for both years. I’m sure they would tell you  

 

  • Like 1

Share this post


Link to post
Share on other sites
8 hours ago, Roger-Ashley Freese said:

Definitely cross reference all your needed parts on partzilla or rockymountainatv.  Both are great places to check part numbers.  eBay is a great place to get used parts. 

 

Thanks, ended up getting a kodiak 700 parts motor for a stupid price! 

Share this post


Link to post
Share on other sites

They are interchangeable Yamaha uses same parts (although different p/n) for their 660 and 700 series one piston engines Glad to hear you've got them for a good price .That's a nice buy cause they're expensive, those are special heat treated steel parts .Congrats.

Edited by fbiondip

Share this post


Link to post
Share on other sites


Topic title edited to 2016 Yamaha Grizzly 700 Blown Up Transmission and moved to Yamaha ATV forum

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Tagged Content

    • By Michael Thornton
      Why does the 2001 grizzly not have com bearings or something to protect the head.
    • By Ajmboy
      For anyone looking for Yamaha Grizzly service manuals, please check the downloads section: Yamaha Grizzly Service & Repair Manuals
    • By gordomanotas
      Hi everybody.
      I found a manual for the Grizzlies, which I do not see on the main thread of manuals by Oxidized Black


       
       
    • By bradleyheathhays
      Have an '02 Ford Taurus that's been grandma driven for all of it's 95k miles. After doing some very easy driving in town for a couple hours today I accelerated up to about 50 and noticed the car didn't seem to be responding to the gas pedal anymore. Looked down and the engine was doing 4k rpm so I let off the gas. Pumped the gas a couple times to see if the car responded and got nothing. Coasted to a stop in a safe lane and tested it in all the gears...nothing. The car stays put if you put it in park but you can roll it back when in any other gear position. The gear leaver on the tree does still give resistance when you move between gears. No music was playing and there was no noticeable sound whenever the breakage occurred.

      Called a friend and was advised to check the gear shift linkage at the top of the transmission. I'm not familiar with what the arm's full range of motion is supposed to be but I noted it's position while in park and low 1 and it seems to be moving well. Felt the connections and they seemed solid.

      Without the benefit of being able to do a proper run-up to a transmission fluid check I wiped and re-dipped the stick and it read fairly high although I hadn't added any fluid for at least 10k miles. The fluid was just a shade darker than light pink and although I didn't check specifically it didn't seem to have a burnt smell.

      There's no way low engine oil could cause something like this is there?

      Any ideas?
    • By Ajmboy
      Here are my 2004 Yamaha Grizzly photo albums if anyone is interested in checking out. 😎
       
  • Similar Topics

    • By JJ78
      I have a yamaha big bear 400, tested all fuses and relays. When I turn on key I get nothing, no neutral light or headlights. Could it be the key switch bad?
       
    • By Asen_77
      Hi All,
      My name is Asen and I am from Eastern Europe, Bulgaria. Riding a Yamaha Raptor 700R and this is my first Quad wanted for a vey long time :)

       
    • By Blenderite
      Hello guys! New to the forum, and fairly new to ATVs. I've driven them, but never owned one. Now I do own one. Just picked it up today. It's a 1999 Yamaha Big Bear 350. It's been through some stuff. The guy I got it from told me the previous owner removed the front diff because he didn't want to replace the half shaft. So it's 2wd, even though it's supposed to be 4x4. Lovely. I can deal with that for now.
       
      More importantly, I need to get it running. The carb needs to be rebuilt. The guy I got it from said he sprayed it all out and it still didn't work. I'm concerned he might have damaged it or not put all the parts back. I was looking at a replacement carb, and the OEM parts is $600. I'd rather not spend $600 if there are any other options. I have seen carbs on Amazon and eBay that are in the $40 - $100 range that say they fit. Anyone have experience with these? I'm going to get a rebuild kit for the current carb just to make sure that won't fix it.
       
      Thats the first thing with it. Secondly, it was completely rewired. I need to find a original wiring diagram so I can put it back how it was, with a key and all. Currently it's wired with just a rocker switch. Any sources for a service manual that would include wiring diagrams?
       
      Thirdly, is the Big Bear 350 a good atv? I picked it up for $700. It does start and run when you spray starting fluid into the air intake, so I am not concerned about the engine being bad. I plan to use it for the farm, running around and carrying things with it like minerals and feed and such. Not really for mudding and things like that. How good is the 99 350?
       
      I am certain I will have more questions as I examine it more, but that's all for now. Thanks in advance for the assistance!
       
      -Blenderite
    • By jolio
      Just got a '98 Yamaha big bear 4x4 in working condition (so far). Looking forward for some good information on this site about how to keep it alive.
    • By Spike976
      So I dug my warrior out of storage replaced the carburetor with one off Amazon & it was running great. Last week it didn't want to start it would crank & I could smell gas but nothing. I replaced the starter,stator,solenoid,spark plug & coil & resistor but still not starting. Checked the stator and its at 30 ohms tried using starter fluid but nothing. I am completely lost and could use some help thank you
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...