Quantcast
Jump to content

Recommended Posts

Posted (edited)

Hi all,

I have just got a 1995 Bayou 220 from my brother. It is in decent condition ant it has not been used much, yet it has been sitting idle for a long time (4+ years).

The plan is to overhaul it and move it to a location where it will be used 4-6 times a year, so, beyond having the battery charged, the idea is to have it ready and in good condition. It will be stored in a steltered place while waiting to be used.

My questions would be: 1. What things should I carry out as basic overhaul tasks / 2. What are the typical aches, things to watch out for in this model/year.

I definitely plan on changing all the fluids, filters,  battery, cleaning the carb, etc. but any specific recommendation from your experience will be of great help.

 

thanks in advance!

Edited by fede hanssen
added date in model
Posted

Welcome to Quadcrazy. When you say overhaul are you talking about tearing it completely down and putting it back together or tearing into the usual suspects that prevent a bike from running due to sitting for a long time? 

Secondly has the bike been laid up inside someplace dry or outside? Has the fuel been drained from the bike and the carburetor run dry before storing/letting it sit? 

These are all factors because if a bike was ran dry and shut down then the carb would be clean for the most part and start right up if the tank is clean and fresh fuel added. 

I'm going to say none of the above happened except for the possibility of it being in a dry place. 

So over all the carburetor def should come off and be cleaned.  Pick up a can of gunk carburetor cleaner or soaking can and clean it out good. Use a small piece of wire and air pressure to blow out all the small ports and jets.  

Fresh plug, battery and all fluids like you said and definitely check the differential fluids. 

Hopefully the tires aren’t dry and cracked. If so amazon has tires for that bike. 

You can re do the seat cover yourself if needed. It’s cheap to do and looks great. 

New grips from amazon will run you $12 to $15 bucks. 

One thing I want to mention and only bc it happened on the 220 I rebuilt and a few others that have come across the forum would be the neutrality safety switch. This switch locks out the ignition and dash lights and is a common problem with this series of the bayou. So if that is one of your problems it’s easily diagnosed but a pain in the as* to change.  

Good luck and keep us posted.  Post a few pics of the bike as you go.   

 

 

Posted

Thanks for the thorough reply.

Ideally I would disassemble it almost completely, but I want to put special focus on the parts more prone to problems. I live in Argentina, so spare parts, although somewhat availalable, are not readily available and have to be ordered.

It has been laid up in a sheltered place but it has not been ran dry. Carb and filters are definitely prime candidates for thorough cleanout. I had missed to include the spark plug in my initial post, thanks.

Thanks for the neutrality safety switch hint, I will include it in my list!

I will keep you guys posted on the progress!

 

Federico

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By quadmaniac
      So here's a topic for anything goes forum and to get a way from the china virus stuff...lol. Has anyone been noticing the small drips of news about ufos and the government confirming? President Obama has an interesting late night segment. How warm and fuzzy do you feel when an ex-gov official confirms objects in the sky they can't explain...
       
    • By marlon smith
      1990 kawasaki bayou 300c idles fine but pops out exhaust and intake when trying to excel, will not take throttle past 1/4 , any one had this problem?
      have replaced carb twice, same thing, fresh built engine cylinder head, same as before, new spark plug, flywheel key is good, pulser test good, good spark
    • By Coyote251
      I am hooking up a speaker on the rear of bike and want to use a factory auxiliary switched plug and not have to cut into the factory wiring or add another switch. I have read a bunch of posts that say there should be an auxiliary 12V connector in the front and one in the rear. I found the one in the front when I hooked up my winch but cannot find any in the rear. I have seen some pictures showing one on the right side attached to the down tube behind the side cover, but there is nothing on my 2024. Can anyone confirm that there is a auxiliary 12V connector in the rear on the 2024 700 Xmr? If so, can you please tell me where it is (with a picture if possible)?
    • By dkgg5755
      This thing came with a cheap aftermarket carb on it the problem I'm having is it won't start with choke installed into carburetor it will start and get run without it installed then bogs out after about 2 min run time I've checked timing , compression, checked valves for proper clearance , also did a smoke test for air leaks found none. 
×
×
  • Create New...