Quantcast
Jump to content

may need new frame :o(

Lildaisygrl18

By Lildaisygrl18
in General ATV Discussion

 Share

Recommended Posts

Lildaisygrl18 Collaborator

Lildaisygrl18

Posted
Posted

Things arent looking good for my frame. The steering bearing retainer nut wont budge despite efforts made by machine shops , garages with impact wrenches, and our own efforts causing us to break a 1/2 inch breaker bar and a socket wrench. SOOOOO it appears i am goin to need a new frame. so the ebay search has started. :aargh::aargh::aargh: I have gotten discouraged beyond belief but i know my honey will help me as much as he can, i think his encouragment is dwindled as well. I was sooo excited about this quad and now it just seems it has caused me more stress than it has fun. :no: BUT when its done its gonna be my baby.

The only way to save the frame is to cut the bolt out risking ruining the threads, in which case we would be welding a new bolt in and hopin that we dont need to replace the bearing ever again, i will keep u all updated. :aargh::aargh::aargh::no::no:

HvPhotog Enthusiast

HvPhotog

Posted
Posted

Are there any machine shops, and or race car builders in your area? They should be able to help you and resolve the problem one way or another.. and or a welding and steel fabrication shop

Chris

Things arent looking good for my frame. The steering bearing retainer nut wont budge despite efforts made by machine shops , garages with impact wrenches, and our own efforts causing us to break a 1/2 inch breaker bar and a socket wrench. SOOOOO it appears i am goin to need a new frame. so the ebay search has started. :aargh::aargh::aargh: I have gotten discouraged beyond belief but i know my honey will help me as much as he can, i think his encouragment is dwindled as well. I was sooo excited about this quad and now it just seems it has caused me more stress than it has fun. :no: BUT when its done its gonna be my baby.

The only way to save the frame is to cut the bolt out risking ruining the threads, in which case we would be welding a new bolt in and hopin that we dont need to replace the bearing ever again, i will keep u all updated. :aargh::aargh::aargh::no::no:

Lildaisygrl18 Collaborator

Lildaisygrl18

Posted
  • Author
Posted
Are there any machine shops, and or race car builders in your area? They should be able to help you and resolve the problem one way or another.. and or a welding and steel fabrication shop

Chris

yeah we called a few today and they say they are to busy to work on stuff like this. Also i think it will cost more to have it machined than it would to buy a frame, still weighing our options though.

BuckBilly Veteran

BuckBilly

Posted
Posted
yeah we called a few today and they say they are to busy to work on stuff like this. Also i think it will cost more to have it machined than it would to buy a frame, still weighing our options though.
Do you have a custom motor cycle shop around there ? They should be able to fix that problem. Repair cost should be cheaper to fix than replace. unless you go to OCC.
HvPhotog Enthusiast

HvPhotog

Posted
Posted

Where are you located?? I could find a place down this way who would do it.. Lower Hudson valley

yeah we called a few today and they say they are to busy to work on stuff like this. Also i think it will cost more to have it machined than it would to buy a frame, still weighing our options though.
wheeler0801 Mentor

wheeler0801

Posted
Posted

wow, we've had to weld quite a few things lately on the wheelers...it may just be your best option if you're not wanting to spend a lot of money...but keep checking, you might just get lucky. and you've got great advice givers on here....

Lildaisygrl18 Collaborator

Lildaisygrl18

Posted
  • Author
Posted
:cute: This girl is smilin ear to ear right now and so is my man. He was able to cut the bolt and then use a air chisel to knock the bolt and out it came. The threads are intact and the bearing is out :yes::yes: My wheeler project is back on tract now and im so excited. I new my man could fix it all for me. Now i wont need a new frame and the painting begins this week. More pics will be up soon . Thanks to all for their suggestions.:cute:
ZacUSNYR Apprentice

ZacUSNYR

Posted
Posted
did you try heat?

Well dang I didn't think of that. ;)

Problem with this little bastard is it's location. you can't get any thing into it. Machine shops don't want to touch it because you can't get a Lathe to it. Would have loved to have had that option - but truth is it'd cost more to have a machine shop get this thing out then to ebay a new frame. Which is the route I feared we may have been going.

So I tried a last ditch effort to persuade this nut it wanted to come out and it did. But I didn't use heat this time, just a die grinder with a dremel attachment and an air hammer (what a sweet little air tool)

wheeler0801 Mentor

wheeler0801

Posted
Posted

YEYYYYYYYYYYYYYYY :) I can't wait to get back on the net after our move and see some more pictures!!!! Glad everything's working out for ya...I told ya, sometimes you just need to cry swear and throw some tools, but at the end, when you're looking at a finished product, it'll all be worth it!!!

wheeler0801 Mentor

wheeler0801

Posted
Posted

lol...i try to get away from it if i'm pissed off because usually when I get frustrated, I put more aggression into it and end up busting my knuckles or something.

I had to learn the hard way. Hope nothing like that happened to you lildaisyyyy :)

quadmaniac Mentor

quadmaniac

Posted
Posted
lol...i try to get away from it if i'm pissed off because usually when I get frustrated, I put more aggression into it and end up busting my knuckles or something.

I had to learn the hard way. Hope nothing like that happened to you lildaisyyyy :)

Same crap happens to me, sometimes you need to walk away.

Good job getting the project moving again Lildaisygrl18!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Popular Now

  • Similar Forum Topics

    • mehim
      NSFW / Looking for fun ideas for our 2nd Quad Runners event at our nudist campground
      By mehim
      Hi everyone and thanks for reading. 
      My husband and me are getting ready to host the 2nd Quad Runners event at our nudist campground. The first one (last year) went pretty well with about 20 quads attending and have to say, it was a smaller group, but they made up for their size with the large interest in partying and there was plenty of nudity as the Saturday night went on. 
      We have decided to host another one this summer, but we are looking for some fun (but safe) riding events. Our grounds are almost all flat and remember we are a nudist campground so many of us are bare as* naked so "slow ride" events would be the best. 
      Give us your thoughts and ideas and feel free to ask us anything you would like, and we will answer right here in the thread. 
      Thanks for your help and ride safe. 
      BTW, let us know what "anything goes" means for this thread section. 

    • logray
      Looking for Quadrunner Flywheel Starter Clutch Gear race diameter
      By logray
      Hi all, 

      I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear). 

    • Mikey509
      First time quad owner looking for advice!
      By Mikey509
      Hi guys, I was given a 2000 Honda Recon fourtrax 250 (I think that's the full name lol). The previous owner had it sitting for a while before I got it. It sat for another few years in my ownership. I got it up and going on its first test drive today!! I was wondering where everyone buys their parts from?  Coming from the car community, we have sites like RockAuto and many more. Anything like that for quads? Also would like to be pointed in a direction, if possible, for plastics. I am missing a few and would like to have it complete. I appreciate any input!
    • toe420
      Frame straightening.
      By toe420
      Hello everyone, I have a 92 honda trx350 I just picked up that has a bent section of the frame where the rear of the seat would clip into place. It almost looks like a tree or something heavy fell on it. Its a fairly deep bend, if that makes sense. It like a V instead of straight. What are peoples goto methods for straightening a section like that? 
    • ebertz28
      Looking to buy
      By ebertz28
      Looking at 2 quads and need help deciding. #1 is a 2021 CF Moto 600 Touring with 69 miles, 2 seater with factory installed plow, windshield, backrest and luggage box with no warranty remaining  for $6500 or #2 2022 CF Moto 500 with 15 miles and a 2 year warranty for $6000?

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...