Quantcast
Jump to content

Recommended Posts

Posted

Even more reason to not start bypassing rev limiters just yet. There are very good rebuild kits for the carbs that have everything inside the package.  Start there and get familiar with the carb, jet size and air/fuel setting. 
Unless the carburetor body has a stripped part ?

  • 1 month later...
Posted

That's interesting.  I guess somehow the reverse gear rev limiter is interfering with forward gears as well.  Some of them have a reverse limiter lockout on the handlebar, so i wonder if grounding or breaking ground would just disable the reverse rev limiter completely....

Neat find!

Posted

I hope this is good info. A buddy of mine thinks he got a bad buy on a quad master. He's not close to where I live or I would go help him plus he's more then able to fix sh**. He's been through everything on the bike so this will be the only thing left !

Posted
Just now, Frank Angerano said:

Im on the iPad when I'm home, phone when im out and about.  I need to set up the ipqd like you said a desk top view?

I'm not sure if you'll be able to see mp4 videos.  What happens is that when people upload videos from an apple device, it's .MOV file but other devices are .MP4. Apple doesn't play .MP4 natively from what I understand.

Posted

@Frank Angerano there are a couple things to check before modifying the wiring from the research i did overcharging/ undercharging can cause issues that are similar and also the cdi can go bad and cause a similar issue, also check the valve adjustment. i will try to get better pictures of what i did but the neutral switch should be grounding the wire going to the cdi to tell it it is in neutral this also allows the starter to be activated. In my case the wiring on my quad is already hacked up so i had no problems cutting the wire and if it didn't work splicing it back together.

Posted

No issues cutting and re splicing. All the above mentioned testing was done. I was going to put the cdi on the chopping block as well. But I would like to try a few more things before he spends the money on the cdi.  

Posted
10 hours ago, Frank Angerano said:

@Ajmboy is there a set up for my iPad that will show different desktop then my phone?

If you are using Safari, should be same as iPhone I think, where when you hit the share button it brings up an option to request desktop site:

FA504C8B-AAEB-47E9-81EF-BED528D46513.jpeg.0407fd7878d0678cc44e60b54732200a.jpeg

  • Thanks 1
  • 1 month later...
Posted

I have a 2000 quadmaster doing the same exact thing. I've replaced the CDI with a new OEM unit.  Replaced the stator and coil with aftermarket units.  I've run a new wire to the coil.  I've cut the blue/red wire.  I've cleaned the grounds. All to no avail.  I'm at my witts end. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Forum Topics

    • By jimbo69
      my outlander 800 sometmes starts and does good ouker times starts but will not idle .any one else have same problem?
       
    • By noticon75
      Anyone ride at in the north east Kansas area? Tuttle Creek, Milford lake areas, Topeka?
    • By jay41198
      I am missing a cdi box for my 1988 Suzuki quadrunner LT 4WD is there a rplacement box that i can wire into this bike to get it back running beings that the cdi box is no longer made 
    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By oztrax
      was thinking most of us on this forum would have another ride, so to get the ball rolling...........
      MY MAX 4 6X6 2009, now this will actually go anywhere including across the water. In the 3rd photo I had gone up the river about 30 meters then climbed up the bank, 6X6 owners call it "swimming" 
      MAX 4 6X6 2008 
×
×
  • Create New...