Quantcast
Jump to content

Recommended Posts

Posted

image.png

Yamaha Australia has announced it will discontinue selling Utility ATVs due to new Australian government legislation that requires the mandatory fitment of so-called Operator Protective Devices (OPDs), YMA will not sell utility ATVs after the government compliance deadline of 11 October 2021.

“The decision to make the fitment of OPDs compulsory is disappointing. The ruling has forced us to withdraw utility ATVs from the Australian market because as a manufacturer we are not willing to gamble with our customers lives by bolting untested devices onto our specifically engineered and designed ATVs,” explains YMA Director Brad Ryan.

As the market leader in this segment, Yamaha recognises that utility ATVs are an important part of farm operations and will comply with stage one of the new consumer legislation. This includes testing and the fitment of warning labels by Oct 2020. This will ensure that Yamaha ATVs remain available until October 2021.

After this date customers will not be able to purchase a new Yamaha utility ATV in Australia – but sport and youth models will continue to be available. This is because new sport and fun ATVs do not need to be fitted with OPDs. In addition, side-by-side vehicles (SSVs) are not affected by this ruling, so YMA will support our utility ATV dealers and ease the transition from ATV to AG bike and SSV business.

“Fortunately, our utility ATV customers can transition to our equally capable lineup of AG bikes and expanding SSV range,” adds YMA Director Brad Ryan.

Customer safety has always been our priority. YMA has provided market leading rider training and promoted proven safety methods. YMA also helped develop the Shark ATV helmet which is the only fully certified farm safe ATV helmet available. YMA feels so strongly about customer safety that purchasers of new Yamaha utility vehicles will receive a free Shark farm safe helmet valued at $250 while stocks last.

YMA is also fully committed to customer care via a national dealer network that will continue to service ATVs and with the supply of parts and accessories into the future.

Source: https://www.dirtaction.com.au/yma-to-discontinue-utility-atvs/

Posted

Disappointing nanny state.  Hopefully the US doesn't follow suit.  I'd be interested to see who owns Quadbar and Lifeguard since the folks saying these must be adopted are mentioning these products as the two options available to remain in compliance.

  • Like 1
Posted

That's crazy - and I'd think a significant loss of revenue for them.  Hell, start making them with OPDs, tack on $300 more and maintain sales. 

The same thought ran across my mind, MarkinAR re: owners.  It'll be here before long - ATVs, riding mowers and go karts. --> on a side note, do you work on ATVs in LR?  I'm not too far south from you.  Just curious.

  • Like 1
Posted

@Dra O Just north of LR.  Small world!  I looked at the member map a bit ago and was surprised how many members there were of this site in the central part of the state.  Only a few active ones though...most were past members.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By hengstserepair
      Howdy ya'll. I am working ona 2000 Yamaha Breeze 125. It was in rought shape when I received it and I am working through issues as they pop up. The quad had been sitting for years. I was able to get her running again, but I need your help with the following issue:
      I don't trust the transmission yet and I don't want to make problems any worse. So, I haven't pushed things hard at all. Low rpms, less than 5mph in reverse.

      Nuetral: Runs as expected
      Reverse: She seems to be driving fine at slow speeds. Going into reverse at idle is fine, coming out of reverse back into neutral won't work (the shifter is just stuck). As soon as I turn off the quad, I am able to shift around without any issue.
      Forward: It slips. It seems to only transfer power to the wheels on a smooth surface and going slightly downhill. When shifting into forward at idle, there is a clacking sounds during the transition. Shifting back to nuetral works just fine.

      Other Notable Symptoms: There was old oil in the vbelt and when I was tuning the carb, it starting blowing out of the CVT cooling vent at the front of the quad. Made quite a mess. There is positive crankcase pressure due to piston blowby, that I have not decided whether or not I am going to fix (customer budget dependant).  Since the oil was old, much darker than the new oil that is in the crankcase, I am thinking it seeped past a bad seal while it was sitting for years. The oil that was in it when I first got it had gas in it.

      Thoughts: I am thinking maybe there is an issue with the clutch. I worry about the old oil intermingling with the dry centrifugal clutch. I was thinking my next step would be to take the cover off of the clutch and inspect it.

      Let me know what you all think. Any advice and ideas is greatly appreciated. This is only the 3rd quad I have worked on and I have a lot to learn.

      Lorne
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By jeffinotown
      Hey guys and gals. I've been working on my friends 2007 big bear IRS. Unfortunately after 3 different people got their hands on it and only made things worse every time.  After months of finding just crazy problems everywhere. I'm finally at the point we're its almost 100% !!! But I'm getting a short somewhere between the 4xW switch I believe. I managed to by searching the internet like a  fiend, got my hands on an official Yamaha wire harness for the year and make. But I don't have the numbered component list and to be honest. After hours of going through and making everything so it's  easy to reference. If anyone has a picture of the referenced components. I would be forever in your debt. I've spent hours marking up the blown up diagram so it will be easy, for any possible future repairs. Please and thank you. Here's a picture of what i have so far.  Unsealed it in plastic so oil and crap won't spill or get smudged. This damn things worth it's weight in gold.              Thanks Jeff                2007 Yamaha big bear 400 IRS.       YFM40FBW
    • By crankin
      I have a 1997 Yamaha Big Bear 350 4x4. It used to start right up. Then all of a sudden it wouldn't crank. I have a schematic for it so I started tracing the problem. I had no power at the starter solenoid. According to the schematic the power comes from the neutral switch and through the starter circuit cut out relay. I cannot locate the cut out relay on this machine.. If I apply power to the relay it will crank with the start button.
      The neutral switch is hard to get to with all the brackets on this thing. I did find out from all my research that if I apply the rear brake lever it will start.
      Does anybody know if the cut out relay exists and where it might be found?
×
×
  • Create New...