Quantcast
Jump to content

Recommended Posts

Posted

My 2005 Artic Cat ATV (250, 2x4) started up and I started to move when it abruptly stalled and died. Now when I turn the key, nothing at all happens. The "N" indicator doesn't light up, the motor doesn't crank, nothing. Any clues as to what might be the problem?

Posted

Blown a fuse.. Get a wiring diagram and start checking the power from the battery onwards using a test light. Check the earth cable too..

A test light is better to use for that purpose than a digital meter which won't detect bad/dirty connections.

Check the battery has power and an earth and then start tracing.. I'd jump to the main switch first off after checking the fuses since there's no lights or neutral or anything.  If there's power there then onwards, other wise go back towards the battery.

And check the main switch is working...  Test before(on the power side), and after making sure it does switch on.

Posted

I have seen this problem before and it ended up being the switch itself burnt out.  Do what mech said and test all then test switch itself to see if you are getting power to it if so then look at switch for problem. Hope this helps

Posted
13 hours ago, kp3004x4 said:

I have seen this problem before and it ended up being the switch itself burnt out.  Do what mech said and test all then test switch itself to see if you are getting power to it if so then look at switch for problem. Hope this helps

Hi, please forgive my ignorance but when you mention the switch, are we talking about the ignition switch with the key? Thank you.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Popular Now

  • Similar Forum Topics

    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By cruteg8
      Does anyone know  the orientation of the bell crank for scrambler 400 2x4 it was not hooked up when I bought quad the way  i put it high goes into reverse and vise versa I flipped it 180 but that put  the shift rod at big angle and it just kinda grinds into gears so dnt think that is right either pretty sure it has to be the exact orientation and the rod adjusted accordingly but I cant seem to find it anyone knows please help 
    • By jeffrocdx
      I'm working on a 2002 Polaris Sportsman 400 with shift indicator problems. The indicator panel only will show Neutral and Reverse. If it's in High or Low, the indicator will show "R".
      I have replaced the three position indicator switch on the transmission. There is also a two position switch on the tranny that I didn't replace. If anyone is familiar with this problem, please let me know what I need to do. Any help is greatly appreciated!
    • By cruteg8
      Does anyone know forsure if u can swap out the Crank Case on a 2001 kawasaki Lakota 300 sport  with a kawasaki Bayou 300 Im seeing yes and no all over some say the mounting position is different so you can't swap the cases but everyother inernal engine part you can swap then im seeing no problem bolts right on can someone plz clarify who knows forsure 
    • By Rockbottom
      Replaced stator now red reverse light stays on in all forward gears and when neutral light in on 
      When put in reverse the light goes out
      any ideas how to correct
      thanks ahead
       
       
×
×
  • Create New...