Quantcast
Jump to content

Recommended Posts

Posted

Pokerrun001.jpg

Pokerrun002.jpg

Pokerrun003.jpg

-Body-

Plastic-Stock

Handguards-none

Graphics-Rath Racing/Insaneatvs

Seat Cover-Stock

Numbers-none

Bar Pad-Fasst company

Fuel Tank-stock

-Chassis/Control/Suspension-

Frame-Stock

Steering Stem-Rated X +1"

Hubs-R.I.S. Designs

Handle Bars-Flexx Bars

Throttle-R.I.S. Designs

Clutch Lever/Perch-Magura

Grips-O.D.I. Rogue

Nerfs-AC Pro pegs w/heel guards

Bumper-AC

Grab Bar-R.I.S. Designs

A Arms- +2+1 FullFlight

Front Shocks-Stock

Rear Shock-Stock

Swingarm-Stock

Axel Carrier-stock

Axle- G-Force +4

Brake Lines- Galfer

Axel Locknut-stock

Rotors F/R-stock

Rims F/R-stock

Tires F/R-stock

Stabilizer-SRP

-Engine and Drive-

Cylinder-stock bore for now

Head-ported

Bore-stock

Stroke-stock

Displacement-450

Carburetor-stock but jetted

Air Box-stock w/o lid

Air Filter-K & N W/outterware

Case Vent filter-K & N

Pipe or Silencer-Rossier Full Polished

Clutch/Plates-Magura Hyd. Clutch/stock plates

Gearing F/R-14/38

CDI-stock

Kill Switch-Pro Designs

Cooling system-stock with engine ice

-Other- please list.

Billet Air filter ring

Billet engine mounts

Drilled T-Valve

HRC Air lid

HRC Cam

HRC Needle

Polished Kicker

Trail Tech -4 oz. Flywheel

Billet Spocket hub

Modquad Billet chain guard

Polished Gear shifter

Anti-vibe cone

Driven Products Knobberz Bar ends

Billet Brake line clamps

Polished Brake pedal

R.I.S. Designs Billet Brake res. cover

R.I.S. Designs Billet Parking Brake block off

110 octane Race gas

Billet case saver

Billet Gas cap Vent

Billet Oil Fill Cap

Flamed Project 321 Gas cap

HRC Needle

LSR Key plate

Polished Warning labels

R.I.S. Designs Billet Clutch cover

R.I.S. Designs Billet Flag Holders

R.I.S. Designs Billet Grab Bar

R.I.S. Designs Billet Radiator cap cover

20x11x8 Sand Devils

20x11x8 Sand Sharks

22x8x10 Dune Trackers

8X9 Rear Douglas Old school

Billet Piston valve caps

Douglas front wheels

Douglas rear wheels

R.I.S. Designs Billet Front Lug nuts

Posted

06 TRX90

Sorry,,,All the Pictures I can find right now...It is locked up in the Toyhauler;)

HPIM3115.jpg

HPIM3100.jpg

HPIM3114.jpg

-Body-

Plastic- Stock

Handguards- Stock

Graphics- Stock with Sticker Mods:D

Seat Cover- Stock

Numbers- Stock

Bar Pad- Stock

Fuel Tank- Stock

-Chassis/Control/Suspension-

Frame- Stock

Steering Stem- Stock

Hubs- Stock

Handle Bars- Stock

Throttle- Stock

Clutch Lever/Perch- N/A

Grips- STock

Nerfs- Stock

Bumper- Stock

Grab Bar- Stock

A Arms- Stock

Front Shocks- Stock

Rear Shock- Stock

Swingarm- Stock

Axel Carrier- Stock

Axle- Stock

Brake Lines- Stock

Axel Locknut- Stock

Rotors F/R- Stock

Rims F/R- Stock

Tires F/R- Stock

Stabilizer- Stock

-Engine and Drive-

Cylinder- Stock

Head- Stock

Bore- Stock

Stroke- Stock

Displacement- Stock

Carburetor- Stock

Air Box- Stock

Air Filter- Stock

Case Vent filter- Stock

Pipe or Silencer- stock

Clutch/Plates- Stock

Gearing F/R- Stock

CDI- Stock

Kill Switch- Stock

Cooling system- Stock

-Other- please list.

This Beauty has the Sticker Mods added to it....From what I hear it adds about 5HP..It also has a Suicide Shifter...

Posted

-Body-

Plastic- Stock

Handguards- Cyrca Bark Busters

Graphics- Limited Edition Stock

Seat Cover- Stock

Numbers- None

Bar Pad- Renthal

Fuel Tank- Stock

-Chassis/Control/Suspension-

Frame- Stock

Steering Stem- Lone Star Racing Anti Vibe

Hubs- Stock

Handle Bars- Renthal

Throttle- Stock with Toomey tors removal kit

Clutch Lever/Perch- can't remember what brand, not stock

Grips- Cant remember what brand

Nerfs- DG crap

Bumper- AC

Grab Bar- AC

A Arms- ASR +2 (adjustable)

Front Shocks- Elka

Rear Shock- Stock

Swingarm- Stock

Axel Carrier- Stock

Axle- Lone Star with lsr sprocket and brake hub

Brake Lines- dual ASR stainless steel

Axel Locknut- lone star

Rotors F/R- stock

Rims F/R- Hyper Tech beedlock carbon fiber rims

Tires F/R- F: ITP GNCCs R: ITP XCRs

Stabilizer- GPR (Not installed yet, exclude if you would like)

-Engine and Drive-

Cylinder- Stock

Head- Stock

Bore- Stock

Stroke- Stokc

Displacement- Stock

Carburetor- Stock

Air Box- Stock w/ pro design adapter plate

Air Filter- K&N

Case Vent filter- Stock

Pipe or Silencer- FMF Fatties w/ powercore 2s, Pro Circuit Platinums

Clutch/Plates- Stock

Gearing F/R- 13/42

CDI- Stock

Kill Switch- Cant remember what brand

Cooling system- Stock with engine ice

-Other- please list.

ASR Pro Racer Tie Rods

Hide a key adapter plate (mounts ignition under the seat)

iron cross tail light

E-brake block off kit

Entended billet throttle

VForce Series 2 reeds

Adjustable Stator Plate (Timing advanced 4)

Billet front brake line clamps

[ATTACH]17[/ATTACH]

[ATTACH]18[/ATTACH]

[ATTACH]19[/ATTACH]

-Pictures Limit 3-

ATV1.jpg.6b119c72573cd024386e31d50a1bccfb.jpg

ATV4.jpg.0e0a966f70ff702fe66dfef5274c3ccf.jpg

ATV.jpg.6c220f7368873ef45dd0dc99037587a2.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By AnthonyT
      In search of my first ATV? What are good older 4x4 models?
    • By Frank Angerano
      So I decided to pick up a small trailer if I could get one for the right price.  I found this one for a few hundred bucks on Craig’s list.  It is  a galvanized trailer which is exactly what I was looking for. The wood was shot and needed some minor repairs which I could care less about as long as the chassis was good. 
      I striped it down and put a new deck on. I had some vinyl realtree graphics that I had laying around so I added them to the fenders which I think worked out well. Very happy with this little guy.  
      I'm having the iron workers at my jobmake me up a few lightweight side rails that will have a 22 degree bend in them to accommodate the tires that slightly hang over the edge and will incorporate some tie down points as well. 








    • By motox88
      Anyone have bad experience with these clutch kits?  Looking to get one for an 80s quad that I have.
    • By DonB
      Had fire start in muffler due to failing fuel pump &/or fuel pressure regulator.  Must I spend the $750+ for a new assembly from Arctic Cat?!?  Here's what I've tried so far.
      Replaced fuel pump & regulator - both from Quantum. PSI is 60 rather than the 42 the dealer advises it should be, so problem persists.  I've now twice replaced the Quantum regulator & discussed w/ Quantum. They advise that they don't have an alternative regulator that would bring PSI down to 42. I've tried several in-line, adjustable pressure regulators but they either didn't work or I couldn't get a constant pressure from them. FYI, I've only tried the adjustable regulators for Fuel Injected engines however, it seems that they require vacuum to function properly.  When I can temporarily get the PSI right, everything works great.  Anyone else ever dealt with this problem, and, if so how did you fix it?  Perhaps I should adapt the fuel system to include a gas tank return line?
      Any insights are greatly appreciated, Don
    • By lindzjo
      Does anyone have a service manual for Qlink 700 atv.I cant find anything on one.Please help
×
×
  • Create New...