Quantcast
Jump to content


Recommended Posts

is there a big difference in the shock YFZ450 shock to the elka basic shock that has a rezzy or piggyback whats different about them?

I do alot of motocross the jumps arnt that big, the biggest one i hit is a about 60-70ft. but i bottom out im just wondering if the basic elka reg. travel shock thats triple rate is good enough or should i go with a more advanced elka shock thats triple rate and has a compression adjustment

I have +2 houser reg. travel a-arms

Link to comment
Share on other sites

i know theres compression, rebound, preload,high/low compression and rebound.

I kno what all the adjustments do, i just wanted to know if the basic elka shock was good enough for me or do i kno a more advanced shock

it wuold be worth it to buy the more advaced, just because if you have to upgrade, you already have an awsomely good shock.

Link to comment
Share on other sites

is there a big difference in the shock YFZ450 shock to the elka basic shock that has a rezzy or piggyback whats different about them?

I do alot of motocross the jumps arnt that big, the biggest one i hit is a about 60-70ft. but i bottom out im just wondering if the basic elka reg. travel shock thats triple rate is good enough or should i go with a more advanced elka shock thats triple rate and has a compression adjustment

I have +2 houser reg. travel a-arms

The stock YFZ shocks are pretty darn good but since you have put wider arms that has probaly softened them up. But are you bottoming in the rear or the front? There is different versions of the YFZ shocks also. Do you have high and low speed compression adjustability or a single compression adjustment? Where is your compression adjustment set at now?

Link to comment
Share on other sites

what year is your YFZ? I run stock 08 shocks on my o5, the 07 BB edition has the better shocks to. The stock shocks can be revalved and resprung(by the right ppl) to compensate for your a-arms and will handle just as good as the elkas, they can even be extended for longer travel.. and that runs around $800 all the way around. but as for elkas, if in doubt and you can afford it, go with the better ones, the what ifs dont hurt as bad..:laugh:

Link to comment
Share on other sites

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By mga
      I just saw a video on TikTok where some guy took the rear end off an ATV and bolted on a roto tiller in place of rear wheels. I wish i saved that video to post here....good thing it was 4 wheel drive...lol but, it seemed to work.
      I'm not sure how he made it bolt on to the drive....
    • By 86ccord
      Starting this build thread to keep up with everything on my build and hope to motivate someone!
       
      I picked up this 2008 Yamaha Big Bear 250 2 weeks ago. A guy that I hunt with parked it at the hunt club for a year or so before I asked him if he wanted to sell. He said " fill my feeder and throw some batteries in my cameras, and you can have it". Sounds like a deal to me! 
      I have attached some pictures of how it sat under a tarp in the woods and when I got it home and cleaned up a little. 
       
       



    • By jashadams
      So I installed a new shock on my 125 yesterday sadly it wasn't adjusted right I took it off to adjust it tried to install it again today and it no longer fits I loosened the nuts on the spring again and it still won't fit idk what I'm doing wrong when I try to install it but I'm lost any tips or videos would be great thanks.
    • By HSTAR
      Hey I have a 1997 big bear 350 4x4
      I replaced the shifter shaft and the shift arm linkage and the rod when I installed them all I was unaware that you had to line the dot on the shifter shaft with the gap on the linkage arm gap put it all back  together and rode it I can't get it to shift in the right gears  I can move the shift cam by hand and goes in different gears but with the shifter shaft in it riding I can't put it in R or N 
      Anyone know how to line up the shifter shaft and the shift cam s
       
    • By ResQ91
      Hi guys
      My 87 Bear 350 won't start and could use a hand.
      Turn key on and Oil light turns on and then slowly fades out. (I think this is key to this) No start, not even a tick.
      battery and connections good
      A Solenoid post jump turns it over
      Neutral Safety Switch wire attached and seems good
      It has not had a wire/switch on Rear Brake Pedal ever since I had it.
      Any thoughts on some other things to troubleshoot this??
×
×
  • Create New...