-
Popular Now
-
Similar Forum Topics
-
By rjsummer
Just some friendly advice on new tires. Check with your ATV dealer.
There are so many aftermarket sites, Revco, Royal Distributing, Partzilla, and on and on. Even with their “ big sales”, my local Canam dealer’s REGULAR price beat the tire prices of the 3rd party sellers! People often assume the Dealership will cost them more, but I found this not to be true!
-
By spock58
Hard working Grizzly with lots of issues, barely made it off the trailer (and only in reverse)!
-
By Krazo
2005 KQ 700
What is the easiest way to put my KQ in dealer mode?
Went riding last weekend, I was pulling a harrow for about 3-4 hours on a hot Saturday, working on some food plots, stopped for a min to unclog the harrow, left the machine running, and it just died on me. Up to that point it seemed to be operating just fine. went to start it and it just cranked, eventually the dreaded red FI light starting blinking (i think it was blinking but might have been constant on). I left it overnight, thinking it had just overheated. but next day it did the same thing, wouldn't start and red FI light. anyway, after readying the service manual, it looks like i might be able to see what codes this thing has if I can get it in dealer mode. Do I really need a special tool to put in dealer mode? a mode switch, part # 09930-82720
any help appreciated. havnt done anything to diagnose it until today but so far all ive done is pull the plug. I had just replaced the plug in February. looks like normal wear for minimal ride time. I tried to get spark on the plug but it looks as if no spark. anyway, please tell me its an easy fix.
Thanks
-
By Matv88
Bought it new for my son. Pretty unhappy. Very very very lean at idle. Then there were a few things the dealer should have done during assembly including choke cable adjustment and rear brake adjustment.
I'm going to drill out the tamper proof plug and adjust the idle/air screw to see if that helps.
-

Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.