Quantcast
Jump to content

Recommended Posts

Posted

I'm having problems with my 07 kingquad 700 where when i go outside to start from not being started in a few days to find out that it turns over well but just won't start but as soon as i pull the cord she starts????????

Does anyone know what's going on???:huh:

Thanks!!!

Posted

Have you checked the fuses? Have you checked for the spark ? Any noticable differences from electric start vs pull start? If an atv is like a car/truck efi requires a hotter spark. Try a hotter spark plug. My Ozark starts quicker by pull start, which makes me beleive for some reason a pull start has a hotter spark at start up.

  • 3 weeks later...
  • 1 month later...
Posted

Hello everyone, just got my King out of the shop to fix my starting problem after all this time and my dealer found the problem....It was my injector that was split possibly by the cold or so on!!!

Finally got her back what a relief.

Thanks for all your help the same guys, take care.....ride safe!!!

  • 4 months later...
Posted

Hey, If you haven't figured it out yet I have had a similar problem. There is a black electronic device under the seat that from what I'm told drains the battery over a short period of time. There is a newer upgrade you can get that "fixes" the battery drain problem. Didn't really work for me though so I bought a maintainer, it's cheaper then buying a new battery. Hope that helps.

KingQuad07

Posted

Hi, i changed the injector because it was split from probable water in the gas as i use it all year long since then no problems what so ever....goes great!!!!

Thanks!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Forum Topics

    • By noticon75
      Anyone ride at in the north east Kansas area? Tuttle Creek, Milford lake areas, Topeka?
    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By Cj Winds
      I have a 2009 Honda Rancher TRX420FA with shifting problems.
      Usually it shifts ok when cold but after couple minutes it will stop shifting with no codes.
      The 1st shift clutch oil pressure when in first gear is 74psi. The 2nd shift clutch oil pressure when in second gear is 74psi.
      The 1st shift clutch oil pressure when in neutral is zero. The problem is when the tranny is in neutral the 2nd shift clutch pressure starts around 10-15psi and builds to 20psi. Is this normal?
    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By Maxg_57
      Is anyone still active on this club
×
×
  • Create New...