Quantcast
Jump to content

2007 400 Outlander trouble with the shifter lever?

sniper1337

By sniper1337
in Can-Am BRP ATV Forum

 Share

Recommended Posts

sniper1337 Newbie

sniper1337

Posted
Posted

Hey everyone

Well i owe a can am 2007 400 outlander atv and i;m having problems with it like with the shifting into gears from like P to R or from R to H and L when the machine is on when i try to shift it makes a grrrrrrrr sound but when the engine is off i can move the the shifter easy

whats the problem is? and would i be able to fix it myself?

BuckBilly Veteran

BuckBilly

Posted
Posted
i did turn down the idle and what would the belt or pulleys have somthing to do with it?
If the belt drive does not work properly it can cause the shifter lingage to not work right. Just like your idle to high can do the samething.
sniper1337 Newbie

sniper1337

Posted
  • Author
Posted

So does the CVT have anything to do with it? and do i have to take it to a dealer for the drive belt or can i do that myself? and how do i know the width and if its not working properly?

  • 1 month later...
  • 9 months later...
Outlander400XT Apprentice

Outlander400XT

Posted
Posted

I know this is old , I just noticed it.Maybe this will help someone in the future.

I had the same exact problem when I bought mine brand new. I took it back and the Dealer installed a new shifter. It was bent! I basically rock it a little and do not force it and it will go into gear sometimes I rock the whole Quad and move the Shifter simultaneously if it seems like it needs more force.

  • 2 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • KIWINZ
      Moto4 Shifting
      By KIWINZ
      Hello
      My son scored a free Moto4 - late 80s from the looks of it. I don't know anything else about its history as the owner wasn't there when i picked it up. Can't see the VIN number as its a bit rusty.  He cleaned the carb and then with some either it started and still starts first pull.  Its runs really nice - not rattles etc.  Goes forwards well and the brakes work fine so it looks like a keeper, However, we have only managed to get it into reverse once.
      1) it won't shift down into what seems like where first would be - 2nd and upwards only. The changes between gears is fine.  No crunching or missed gears - just no first gear.  2nd gears appears to be as low as it will go
      2) the clutch - when you hold the gear lever up or down works (only the second ATV we have had.  Other is a Quadrunner which doesn't have this feature)
      3) no neutral light - will start when no in neutral - should it do that?
      4) the one time we did get it into reverse the neutral and then the red (reverse) lights worked. Swapped easy between forward and reverse - when it went into second, it didn't return to first or neutral
      5) checked the clutch adjust on the RHS - seemed fine to me.  When i turned the screw back 1/8 it was where it was to start with.  Clutch doesn't slip.  The bike will move forward is all gears.
       
      Any help would be appreciated
       
      Thanks
       
      Andrew
    • jeffrocdx
      2002 Polaris 400 Sportsman Shift Indicator Issues
      By jeffrocdx
      I'm working on a 2002 Polaris Sportsman 400 with shift indicator problems. The indicator panel only will show Neutral and Reverse. If it's in High or Low, the indicator will show "R".
      I have replaced the three position indicator switch on the transmission. There is also a two position switch on the tranny that I didn't replace. If anyone is familiar with this problem, please let me know what I need to do. Any help is greatly appreciated!
    • Coyote251
      Location of rear 12V accessory plug on 2024 Outlander 700 Xmr
      By Coyote251
      I am hooking up a speaker on the rear of bike and want to use a factory auxiliary switched plug and not have to cut into the factory wiring or add another switch. I have read a bunch of posts that say there should be an auxiliary 12V connector in the front and one in the rear. I found the one in the front when I hooked up my winch but cannot find any in the rear. I have seen some pictures showing one on the right side attached to the down tube behind the side cover, but there is nothing on my 2024. Can anyone confirm that there is a auxiliary 12V connector in the rear on the 2024 700 Xmr? If so, can you please tell me where it is (with a picture if possible)?
    • wilmpie
      kymco mxu 250 Shifting forwards back no neutral
      By wilmpie
      hi everybody
       
      I have a kymco mxu 250 automatic from 2006 250 cc  that keeps going forwards or backwards when i shift backwards or forwards an then shift to neutral .
      if i shutdown the motor and push the quad and restart then its in neutral and don't go forwards or backwards, i already checkt if my motor is running good stationairy .
       
      what can it be or what can i do to fix this?
      thanx in advance
      p.s. Sorry for my bad english it's not my first language.
       
       
       
    • HHurks
      Hello everyone
      By HHurks
      Hi to all
      Newbie here. Not new to ATVs. Look forward to learning a few new things and hope to maybe help some too.

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...