Quantcast
Jump to content


Trying to choose


Recommended Posts

im having a hard time deciding. both of my friends have great ATVs and i know i want one of them but i cant pick. the first is a YAMAHA BRUIN 350 4x4. and the other is a KAWASAKI PRARIE 360 4x4. any oppinions would be greatly appreciated. THANKS...

Link to comment
Share on other sites

I looked at a bruin 350 a few years back but ended up buying a Yamaha Kodiak 450 just because of the more power and 4WD features made a difference. They don't make the Bruin 350 anymore, it's a Grizzly 350. They are witin $100 of each other. Are you looking 2WD or 4WD?

Look at the specs of the 2 and compare, next..go sit on them both at a dealer.

Link to comment
Share on other sites

i wud probably go for the yamaha.. all around good atv.. the only one thing i dont like about kawasaki is that the front suspension is modeled like the polaris sportsman.. it has the macpherson strut compared to the yamaha bruins double wish bone... and the bruin has a speedo compared to the kawaskis three idiot lights... here is a website that u can compare the two atvs 2005 Kawasaki Prairie® 360 4x4 ATVs

and u can also get info from people about the two atvs

Link to comment
Share on other sites

  • 1 month later...
  • 4 weeks later...

If you get a late model Bruin you can get IRS. The Kaw. has a straight axle. That is one consideration. I have owned four Yamahas and they were all very good quads. I haven't had a Kaw. but many of my friends swear by them. Your doing the right thing, take your time and research then buy the one that best fits your needs.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By bob2007
      Hy there great to be able to communicate with people having knowledge I have a continuous problem with a leaking carburetor and I just saw a small rubber hose detached from the bottom of the carburetor and i cannot find were it should be attached and how the two side should be affixed to the carburetor any suggestions as i cannot find a description plan on it thank you Bob
    • By newguy024
      Just got into ATV riding just last week, never had much money so i couldnt afford to buy anthing, so now at the age of 34 i just bought a 1987 suzuki quadrunner 300 for 500$ took it out a few times and what a rush of excitement to go through that first mudhole haha!
    • By justent_88
      Hello, im looking for some input on this situation i have. My 94 Mojave has no spark, and i have no idea what it is. Ive replaced/tested the magneto, the pickup coil, cdi, the ignition coil. Even the key and Killswitch. I haven't tested the harness its self, but i have tried another harness and still nothing. The only thing i can think of is the fly wheel itself. I have found a lot of metal shavings in the fly wheel and have cleaned it the best I could. But nothing happened afterwards. I am truly stumped here and hoping some of yous could shed some knowledge/ideas that could help get this thing to fire. 
    • By HSTAR
      Hey I have a 1997 big bear 350 4x4
      I replaced the shifter shaft and the shift arm linkage and the rod when I installed them all I was unaware that you had to line the dot on the shifter shaft with the gap on the linkage arm gap put it all back  together and rode it I can't get it to shift in the right gears  I can move the shift cam by hand and goes in different gears but with the shifter shaft in it riding I can't put it in R or N 
      Anyone know how to line up the shifter shaft and the shift cam s
       
    • By ResQ91
      Hi guys
      My 87 Bear 350 won't start and could use a hand.
      Turn key on and Oil light turns on and then slowly fades out. (I think this is key to this) No start, not even a tick.
      battery and connections good
      A Solenoid post jump turns it over
      Neutral Safety Switch wire attached and seems good
      It has not had a wire/switch on Rear Brake Pedal ever since I had it.
      Any thoughts on some other things to troubleshoot this??
×
×
  • Create New...