Quantcast
Jump to content

Recommended Posts

Posted

whats up? ok i got a 92 king quad. ran excelent for about 17 years now =) when i went to start it this year, i put in new gas and charged the battery. it wouldnt fire.. checked the plug, looked kinda crappy, so i just put in a new plug anyway. went to fire it again and it started to run but when i let off the start button it went flat instantly. went for it again, choke and a little throttle, and it started and revved up, only to die when i let off the start button, like i didnt have a spark anymore. so my ? is, do you know why my quad will only fire when i have the start button pushed?

Posted

Did you leave gas in it for a long period of time? You may just need to clean your carb. Or you may have a loose connection in your ignition system, check the key switch, the kill switch, and all wire connections from the battery to the primary and secondary ignition systems for a loose connection or ground. Also check the coil wire/plug boot.

Posted

Pull the plug wire off and test the spark to see if you actually only get spark when pressing the start button. is it a matter of every time you start it, its start up but dies after you release the start button? If so, that's odd.

Like DD said, check your connections.

How does it crank, slow? How old is the battery? Is there a safety switch on that model? I don't remember. It has like 3 shifters right?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Forum Topics

    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By Mikey509
      Hey guys, so I've been messing with my quad, and between all the starts, the battery is dead. Is there a certain way to charge these? Can I just throw a trickle charger on it and call it a day? can i also jump it like a normal car with a battery pack or is that to much voltage 
    • By LMI
      Hi all.  New to the forum & quads.  Seems like a great place full of info.
      I just recently picked up a 2005 Suzuki KingQuad LTA700.  I need a battery.  I've been reading up on conventional vs AGM types.  I have a Royal Distributing and Canadian Tire.  RD has 2 types avail for my year/Model a battery YTX16-BS CRANK $75, and BATTERY YTX20CH-BS YUASA $140.  Neither of these is the type from the manual FTZ16-BS.
      from what I can tell... I think the only difference is the capacity with the $75 unit rated at 14 AH/10HR and the $140 unit rated at 18 AH/10HR ... which is the rating in the manual for the FTZ16-BS.  How much does this make a difference for nearly x2 the cost?
      And about the models/type numbers.... what is important to know ... they all end in "-BS" but are the other details relevant or just manufacturer naming?
    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
×
×
  • Create New...