Quantcast
Jump to content


07 suzuki vinson 500 fuel shut off?


Tazman6789

Recommended Posts

ive read the owners manual and it doesn't mention any where a fuel shut off for transportation or storage. on the carb the fuel settings mine has is "on", "prime" and "reserve" but no "off" is it suppose to be this way? what should i set this to when im transporting or storing my atv?

My '07 Arctic Cat DVX400 has a fuel petcock that's like your Vinson's.As long as you have it in either "on" or "res" during storage/transportation you'll be fine.It's setup for when vacuum is applied it opens and allows fuel flow.If it's like mine it gets the vacuum from the carb.When it's in the "prime"position it flows with or without vacuum.Hope this helps

Link to comment
Share on other sites

no no no There is no off the only way gas can flow thru is if the motor is running so it dont matter were its turned to

Incorrect, the prime position allows fuel to flow straight into the carb without the engine running, otherwise, if your carb is empty there would not be any way to get fuel into the carb since there would not be sufficient vacuum created by just cranking the starter.

Link to comment
Share on other sites

Hey Cyrus, maybe your tank is empty smarty pants. When you turn a vacuum operated petcock to the prime position, it functions just like a gravity feed system. If YOU would like to do some research, read this description of how a vacuum operated petcock works. Pretty much the same thing I said earlier just in more detail.

Below is a description from drpiston .com, and here is a link to another site that will tell you the same thing.Petcock Operation

The petcocks are vacuum operated petcocks. This means that they have a little diaphragm and valve set-up in them which responds to engine vacuum and allows fuel to flow only when the engine is running and supplying vacuum. This is is how things work when the petcock lever is set to the "on" or "run" setting. So we see that the "on" setting is actually the "off" setting when the engine is not running. So if the engine quits for any reason (as in a "down" situation), the petcock(s) will automatically close and prevent the fuel from flowing out.

These petcocks also have two other lever settings:

The "prime" setting bypasses the vacuum function and allows fuel to flow at all times, even when the engine is stopped. The purpose of this setting is to allow the carb float bowls to be filled when the engine is not running. Note that if you run your petcock(s) on the prime setting all the time, you lose the safety feature provided by the vacuum petcock. Note also that on this setting, fuel is prevented from flowing out through the carbs, into cylinders, etc.) only by the float valves in the carbs, which close when the carbs are full. Should one of these float valves stick open or leak, you then get flooding through that carb.

The "reserve" setting is used to access an additional amount of fuel when you start to run out. Here is how this works. These petcocks have inlet towers which stick up into the tank. In the "on" position, fuel flows down to the petcock through an opening high on the tower. So when you "run out of fuel" you actually have some more fuel sitting in the bottom of the tank which lies below this high inlet. When you turn the petcock lever to "reserve", a lower inlet near the bottom of the tower opens, so you can gain access to this last bit of fuel in your tank.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Gwbarm
      I generally use Non Ethynol fuel in all my small engines. I just got back from the gas station and that fuel has really increased in price since last year, I will continue to use it, even though its north of 1.00 a gallon more. That seems minor compared to cleaning and repairing carbs every year. 
      I was just curious as to what others are doing in regard to gas in their quads, i know a lot of the newer ones are fuel injected which shouldnt pose a problem, but i have had lots of problems with rust and jell forming in carbs when using ethynol fuel.
    • By bighoss
      i got my son new outlaw 50 a few weeks ago and we went rideing yesterday and while we were riding it died and it took me like 10 min to get started back and it died agen when we got close to truck so i pulled it back took the plug out it looked like it was drop in a bucket of gas took the air filter out and the ait box was full of gas also got home it started rite up today i started it it starter up but was blowing what look like water out of the exholst let it idel for a lil bit did not die but as soon as hit the gas and let off it will die what does that sound like i thnk i going to take it back to dealer and tell them to fix it as it is under warrenty but would like to know what it could be first
    • By STLJ
      Gday all,
       
      Been trying a couple different ways now to download a manual. Not sure what I am doing wrong but could someone walk me thru it?
      I go to DL page and click on link
      get a pop up for a PDfixer or something
      close that and then hit download button and no go
      tells me I have reached my limit but I have never DL anything ever. 
    • By semicolon
      Hi, I am having issues with my TRX350D fuel pump.  It suddenly stopped running so I have replaced all the fuses and cleaned all the terminals.  I have fitted a new pump, fuel cut-off relay and rectifier.  Still nothing!!  The pump runs when attached to a battery.  The engine will start on the choke and the filter fills with fuel but it will  not rev and dies when the choke is closed. I have power to the relay but nothing at the pump black/white wire when cranking the engine.  Any ideas where to go from here would be very much appreciated!!
       
    • By rgeiser
      View File 2003 Polaris Ranger 400-500 service manual
      2003 Polaris Ranger 400-500 service manual
      Submitter rgeiser Submitted 04/18/2024 Category Polaris UTV  
×
×
  • Create New...