Quantcast
Jump to content

Recommended Posts

Posted

hello everyone i have an 1984 atc 125m and it now longer produces spark and my manual tells you what to do just not how to, today i was messing around looking for the grounds i got one off and wire brushed it and the other i could not get off to inspect...

so i was hoping i could find out how many grounds the 125m has and possibly if a more experienced member can walk me thru how to get it running again,and has this happened to anyone else?

p.s. while inspecting the coil i unplugged it brushed it off and while hooking it back a spark gapped from the prong to the wire so its getting spark... kind of

Posted

Check the connection between the coil wire and plug boot. The plug boot should have a scew in the end that attatches to the coil wire. Unscrew the boot, make sure there is good, fresh wire at the end of the coil wire, clip it back a bit if you need to with a pair of diagonal cutters. When you have made sure you have good wire right at the end of the coil wire, firmly push the boot back on and gently screw it back on. You want it on well, but don't turn it too tight as that will damage the wires inside the coil wire. That is the one of the simplest scenarios and it wont cost you anything to check it so I would start with that. Beyond that, study that diagram that MWKE provided and start looking for damaged or loose connections, if you still are having problems, you will probably need to do tests on the ignition components. A good service manual will give you specs and directions on how to do these tests. I would definately check out the link that Ajmboy posted for you.

  • 2 weeks later...
Posted

This is the Kinda Crap that really ticks me....Try to help a Triker out with Excellent Info only to be Denied event the Simplest of Thank yous:realmad: Its been almost a month since the Original Post....I think we need to be Billing these one post wonders before we give up the Goods....:laugh:

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By cavry
      O3 sat a while. Engine is running fine. I got it into neutral, did some general tune-up and cleaning then pulled the shifter pedal up and it locked up and will not release into neutral again.  Does anyone have experience with this problem?  Thanks for looking and any help.
      Cavry
    • By jay41198
      I am missing a cdi box for my 1988 Suzuki quadrunner LT 4WD is there a rplacement box that i can wire into this bike to get it back running beings that the cdi box is no longer made 
    • By 88bigbear
      Bought a 88 big bear 350 4x4 took it for a run and lost spark, found it was stator so I replaced that then took it for a long run and it sat for 2 days and no spark again, this time stator tests good on ohms and voltage for source and pick up coils so I started replacing things including regulator, ignition, ignition coil and plug cap, spark plug and everything tests great including all safety switches until the orange wire for ignition coil from the cdi it only reads 3 volts so I replaced the cdi and still 3 volts, any ideas??
    • By cfherrman
      Fixing for a friend. Atv was at a different friends house to be fixed and he rebuilt the carb and had it running nice, then it shut off and no more. He replaced the key and the coil.
       
      So he got busy, so I am helping, I checked the wiring from the stator to the cdi, and from the cdi to the coil. All is good. I checked resistance on the pickup coil, good, and on the source coil, open. I buy a new stator (China) and the 4 prong plug only has 3 wires in it while mine has all 4. I checked resistance in the source coil and it's in the 300's. I pulled one of the old pickup wires out of the old stator and wire it in the new one. Still no spark.
       
      Why do the wires differ, I checked the VIN again and it's "J" for the year and I got a 1988 stator. Please help!
    • By LashinWheeler
      Hello all, I have a 2006 Polaris Sawtooth with no spark. It has a dead battery but with a jump pack on it, it will still not Spark. Plug is good, Throttle ETC is not closed, Stator pick up coil seems to Ohm out in the correct range, Unsure how to properly check the CDI. And when ignition is on the Neutral and reverse light come on but after cranking just the neutral stays on. 
       
      Any help would be great,
       
      Thanks!
×
×
  • Create New...