Quantcast
Jump to content

2000 2 stroke 400 polaris xplorer high gear grind

Pennywise

By Pennywise
in Polaris ATV Forum

 Share

Recommended Posts

Pennywise Rookie

Pennywise

Posted
Posted

2000 2 stroke polaris xplorer 400

just bought quad goes into low gear reverse but high gear it grinds going in and when i do get it in it pops back out into netrual some times it will go into high gear Can anybody help me???????

Sc0tt Mentor

Sc0tt

Posted
Posted
okie thanks i went down polaris shop they said shifting linkage or the tranmission fluid could be low

HELP!

Did you get the fluid level? Have you taken the clutch cover off and examined the belt and clutches?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Popular Now

  • Similar Forum Topics

    • LashinWheeler
      2006 Polaris Sawtooth No Spark
      By LashinWheeler
      Hello all, I have a 2006 Polaris Sawtooth with no spark. It has a dead battery but with a jump pack on it, it will still not Spark. Plug is good, Throttle ETC is not closed, Stator pick up coil seems to Ohm out in the correct range, Unsure how to properly check the CDI. And when ignition is on the Neutral and reverse light come on but after cranking just the neutral stays on. 
       
      Any help would be great,
       
      Thanks!
    • OldATVowner
      99 Bear tracker no neutral or reverse light or start button
      By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • cruteg8
      Bell Crank Orentation 2000 Polaris Scrambler 400 2x4
      By cruteg8
      Does anyone know  the orientation of the bell crank for scrambler 400 2x4 it was not hooked up when I bought quad the way  i put it high goes into reverse and vise versa I flipped it 180 but that put  the shift rod at big angle and it just kinda grinds into gears so dnt think that is right either pretty sure it has to be the exact orientation and the rod adjusted accordingly but I cant seem to find it anyone knows please help 
    • hengstserepair
      2000 Yamaha Breeze 125 slips in Forwards, runs fine in reverse
      By hengstserepair
      Howdy ya'll. I am working ona 2000 Yamaha Breeze 125. It was in rought shape when I received it and I am working through issues as they pop up. The quad had been sitting for years. I was able to get her running again, but I need your help with the following issue:
      I don't trust the transmission yet and I don't want to make problems any worse. So, I haven't pushed things hard at all. Low rpms, less than 5mph in reverse.

      Nuetral: Runs as expected
      Reverse: She seems to be driving fine at slow speeds. Going into reverse at idle is fine, coming out of reverse back into neutral won't work (the shifter is just stuck). As soon as I turn off the quad, I am able to shift around without any issue.
      Forward: It slips. It seems to only transfer power to the wheels on a smooth surface and going slightly downhill. When shifting into forward at idle, there is a clacking sounds during the transition. Shifting back to nuetral works just fine.

      Other Notable Symptoms: There was old oil in the vbelt and when I was tuning the carb, it starting blowing out of the CVT cooling vent at the front of the quad. Made quite a mess. There is positive crankcase pressure due to piston blowby, that I have not decided whether or not I am going to fix (customer budget dependant).  Since the oil was old, much darker than the new oil that is in the crankcase, I am thinking it seeped past a bad seal while it was sitting for years. The oil that was in it when I first got it had gas in it.

      Thoughts: I am thinking maybe there is an issue with the clutch. I worry about the old oil intermingling with the dry centrifugal clutch. I was thinking my next step would be to take the cover off of the clutch and inspect it.

      Let me know what you all think. Any advice and ideas is greatly appreciated. This is only the 3rd quad I have worked on and I have a lot to learn.

      Lorne
    • Admin
      2013-2016 Polaris RZR 570 Service Manual
      By Admin
      View File 2013-2016 Polaris RZR 570 service manual
      Download the 2013-2016 Polaris RZR 570 service manual PDF for complete factory repair, maintenance, troubleshooting, and diagnostic procedures. This comprehensive Polaris RZR 570 repair manual covers all major systems including engine service, EFI fuel injection, transmission and clutch repair, drivetrain maintenance, suspension, steering, brakes, electrical troubleshooting, wiring diagrams, torque specifications, and factory maintenance schedules.
      Designed for RZR owners, mechanics, trail riders, racers, and DIY enthusiasts, this factory-style service manual provides detailed step-by-step instructions and diagrams for maintaining, troubleshooting, repairing, and rebuilding the Polaris RZR 570 side-by-side UTV.
      Topics covered include:
      Polaris RZR 570 engine repair
      EFI fuel injection diagnostics
      CVT clutch and transmission troubleshooting
      Drivetrain and differential service
      Suspension and steering maintenance
      Brake system repair
      Electrical troubleshooting and wiring diagrams
      Oil change procedures and maintenance intervals
      Torque specs and factory service data
      Polaris RZR diagnostic procedures
      Popular related searches:
      2013 Polaris RZR 570 service manual PDF
      Polaris RZR 570 repair manual
      RZR 570 wiring diagram
      Polaris RZR torque specs
      RZR 570 clutch problems
      Polaris RZR maintenance schedule
      Polaris UTV factory service manual PDF
      This Polaris factory repair manual is ideal for owners looking to maintain, troubleshoot, repair, or upgrade their RZR 570 for trail riding, recreational off-roading, hunting, racing, and utility use. Whether you're performing routine maintenance or a complete rebuild, this manual provides the factory information needed to keep your Polaris RZR 570 running at peak performance.
      Submitter Admin Submitted 05/30/2026 Category Polaris UTV  

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...