Quantcast
Jump to content


polaris 250 trailbler 2 stroke year 2000

bbbbirdman

By bbbbirdman
in Polaris ATV Forum

 Share

Recommended Posts

DirtDemon Veteran

DirtDemon

Posted
Posted (edited)

It could be the alot of things. How does the machine run other aside from the idling problem? Has the machine been sitting for a while? If so, I would open the carb up and give it a thorough cleaning. It could have an air leak somewhere, possibly a leaking crank seal, or a leak in the intake area, maybe where the intake boot bolts to the motor. Also, check the air cleaner and try a new spark plug. I would also do a compression test.

Edited by DirtDemon
Link to comment
Share on other sites
Sc0tt Mentor

Sc0tt

Posted
Posted
It could be the alot of things. How does the machine run other aside from the idling problem? Has the machine been sitting for a while? If so, I would open the carb up and give it a thorough cleaning. It could have an air leak somewhere, possibly a legal crank seal, or a leak in the intake area, maybe where the intake boot bolts to the motor. Also, check the air cleaner and try a new spark plug. I would also do a compression test.

What he said.

Link to comment
Share on other sites
DirtDemon Veteran

DirtDemon

Posted
Posted

LMFAO, I never noticed that, but you are right, that does look like Sgt. Slaughter, it is actually a picture of his Father-in-law. Hey Admin, is your Father-in-law Sgt. Slaughter? Have you been holding this info from us?

In order to stay on topic, I will ask bbbbirdman if he has had any luck figuring out his problem. So what it be birdman, any luck?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • N00bie
      2012 John Deere Gator 850i RSX Idle Problem
      By N00bie
      From Arkansas. Just bought a 2012 Gator 850i RSX because I could not pass up the price. BUT it has an idle problem. So, to be honest, I joined just to get a service manual. I have a choice: 1)Buy a hard copy: ~$100; 2)Buy a CD ~$35.00; Get a direct download for free posting 10 times; or get a download for $29.00 (subscription). Haven't decided what to do yet.
    • semicolon
      TRX350D fuel pump problem
      By semicolon
      Hi, I am having issues with my TRX350D fuel pump.  It suddenly stopped running so I have replaced all the fuses and cleaned all the terminals.  I have fitted a new pump, fuel cut-off relay and rectifier.  Still nothing!!  The pump runs when attached to a battery.  The engine will start on the choke and the filter fills with fuel but it will  not rev and dies when the choke is closed. I have power to the relay but nothing at the pump black/white wire when cranking the engine.  Any ideas where to go from here would be very much appreciated!!
       
    • Clydaho
      2022 Hisun Sector 550 Gas gauge stopped working
      By Clydaho
      2022 Sector 550, 414 miles on it and the gas gauge reads empty.  I topped off the gas and it didn't change.
      There is no fuse that I could find.  No access at the gauge cluster.
      Wiring on the top of the tank looks good, properly connected.
      Could the sending unit in the tank be stuck or broken?
      Has anybody removed the tank lid?  Any tricks?  
      Any other ideas?
      Thanks for any help,
      Clyde
    • hardcastle
      1993 Suzuki King Quad 300 bucks and farts like crazy
      By hardcastle
      My friends KQ 300 starts fine and runs, as soon as you put it in gear and try to accelerate its bucks and farts like crazy, not moving... I cleaned carb and it worked good for 1 day... now back to same problem.... could it be such as a bent valve????
    • skittle021
      Super Weird Problem with Primary Sheave/Clutch... (Hisun 550)
      By skittle021
      So I've got a Hisun 550 that I was doing some work on that required removing the CVT and it's housing. Upon attempting to reinstall the clutch, sheaves, etc, I found that the belt no longer fits - it's far too wide. None of the parts have been replaced, they're all OEM. Exactly the same parts as what I took off a few weeks ago.
      To be more specific, my belt is 1.25in wide, but the gap between the clutch and the primary sheave is only 7/8in wide. I'll include a few photos to explain.
      Has anyone ever experienced such a bizarre problem? Any help at all would be appreciated, I've been stuck on this for a month. I'm open to just about any suggestion.
      Photos: 
       





COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...