Quantcast
Jump to content


New guy from the Pacific NW

jg09

By jg09
in New Members Area!

 Share

Recommended Posts

jg09 Rookie

jg09

Posted
Posted

I live up in Northwest Washington. I ride a 2006 Kawasaki KFX400. So far, it's got HMF Sport Series exhaust, ITP Holeshot GNCC tires, Regina chain, K&N air filter, DynoJet stage 2 jet kit, Wiseco 440cc big bore kit, and nerf bars that I can't remember the brand of at the moment. I don't have a lot of riding experience and I really wasn't planning on buying a quad before this, but the deal was too good to pass up. It was built up the way it is when I got it plus it included all the stock pieces, as well. here's a few pics

165775_489682756828_580281828_6494848_5101178_n.jpg

167629_489683536828_580281828_6494856_5174045_n.jpg

180039_489686426828_580281828_6494924_2849331_n.jpg

Link to comment
Share on other sites
jg09 Rookie

jg09

Posted
  • Author
Posted
Welcome to QC, what part of Washington are you in, I am in Bonney Lake, which if you don't already know is somewhat close to the Puyallup/Tacoma area. I noticed you have stock tires on in the pics, have you tried the Holeshots yet? I run the GNCC's too, I love them, I will probably buy them again when it is time for new tires.

I live WAAAAAAY up northwest in Everson (I can see into canada if i stand on my roof). The pics don't show the exhaust or the tires. They're actually pics that I stole off of the previous owner's facebook profile and were taken with the bore and air filter only. Tires and exhaust are both very recently replaced.

Link to comment
Share on other sites
DirtDemon Veteran

DirtDemon

Posted
Posted
I live WAAAAAAY up northwest in Everson (I can see into canada if i stand on my roof). The pics don't show the exhaust or the tires. They're actually pics that I stole off of the previous owner's facebook profile and were taken with the bore and air filter only. Tires and exhaust are both very recently replaced.

That's near Lynden isn't it?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • HSTAR
      1997 Yamaha big bear 350 Shift shaft issue
      By HSTAR
      Hey I have a 1997 big bear 350 4x4
      I replaced the shifter shaft and the shift arm linkage and the rod when I installed them all I was unaware that you had to line the dot on the shifter shaft with the gap on the linkage arm gap put it all back  together and rode it I can't get it to shift in the right gears  I can move the shift cam by hand and goes in different gears but with the shifter shaft in it riding I can't put it in R or N 
      Anyone know how to line up the shifter shaft and the shift cam s
       
    • John Sinclair
      1992 yamaha big bear 350 carburator issues
      By John Sinclair
      I WANTED TO UPGRADE THE CARBURATOR ON MY 1992 BIG BEAR 350, SO I ORDERED A NEW CARB FROM EBAY.  ACCORDING TO THE WRITE-UP IT WAS A GOOD FIT FOR BIG BEARS FROM 1988 TO 1996.  WHEN I REMOVED MY ORIGINAL CARB I NOTICED THAT IT WAS DIFFERENT FROM THE NEW CARB MY CARB HAD TWO THROTTLE  CABLES THE NEW CARB ONLY HAD ONE CABLE.  HOW CAN I MAKE THIS CARB WORK ON MY TWO CABLE THROTTLE?  
    • ResQ91
      Help with 1987 Yamaha Big Bear YFM350FWT Carb
      By ResQ91
      Hi Guys!

      New member and could really use your advice. I would have to believe this has been an issue for others but a search here came up with nothing......? (Probably me not doing search correctly)
       
      I have an 87 Big Bear 350 YFM350FWT
      The OEM Mikuni BTM carb is shot and would rather replace than rebuild.
      It is no longer made and I have had good luck with NICHE carbs so I ordered a #K-CRB-0006 This was what they said was replacement when ordered. This Carb only uses 1 Throttle cable. The Slide is linked so it uses one. (OEM had 2nd cable coming through top to move slide)
       
      Problem is when I ordered a replacement Cable from NICHE (#C-CBL-0061) the Cable wire is a little short, not allowing Throttle to return all the way down to Idle position. I called NICHE and they are at a loss. Haven't gotten back to me after 2+ weeks.
       
      What would you recommend other than a carb rebuild?
      Can I just use 1 of the OEM cables (It is the right length) and snip/disconnect the other that went to top of Carb for Slide?
      Or ??
       
      Thanks in advance for any advice you have!!
       
      Dave
    • Admin
      2006-2011 Honda Rincon TRX 680 FA/FGA Service Manual
      By Admin
      View File 2006-2011 Honda Rincon TRX 680 FA/FGA service manual
      2006-2011 Honda Rincon TRX 680 FA/FGA service manual
      Submitter Admin Submitted 04/09/2024 Category Honda ATV  
    • Admin
      1984-85 Kawasaki Tecate ATC Service Manual
      By Admin
      View File 1984-85 Kawasaki Tecate ATC service manual
      1984-85 Kawasaki Tecate ATC service manual
      Submitter Admin Submitted 03/24/2024 Category Kawasaki ATV  

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...