Quantcast
Jump to content

my winter quad updates

Ichoptop

By Ichoptop
in ATV & Off Road Modifications

 Share

Recommended Posts

Ichoptop Enthusiast

Ichoptop

Posted
Posted

I've been wrenching on my quad since Im not really a fan of cold weather. Picked up a full front end from an old race buddy back east for next to nothing. Turns out they are Axis shocks rebuilt in August and OMI +2 arms. Just jumping on it in the garage you can tell its much more plush than the stockers. After a fight with the post office, they finally found my brake lines and I got it all put together on saturday.

165550_1672738972924_1070882471_1787223_2027888_n.jpg

It was a tight fit but I fabbed some brackets and got it all to work together.

180090_1672736172854_1070882471_1787210_4019315_n.jpg

Unfortunatly, my Blingstar front bumper that I loved had gotten so smashed in over the last 2 years (I hit trees) that the top would hit the rezzies so it is now a wall hanger and I picked up a new V bumper.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • TomJulio
      Wanted- Honda TRX300 front wheels -2WD
      By TomJulio
      Looking for two stock front wheels for 92 TRX300 2WD.   I think they are 6 x11" size.     
    • TomJulio
      1992 Honda TRX300 front wheels
      By TomJulio
      I recently noticed my Fourtrax 2WD has 4WD wheels installed on the front.  The back spacing is significantly different than 2WD wheels and they are almost touching the strut springs and the tires actually do touch the springs..   So far, no luck locating 2WD wheels to correct this issue. 
    • Olchap
      1989 Yamaha big bear 350 front brake cylinders
      By Olchap
      Hi, I am new to this forum I am currently working on my 1989 Yamaha front end.  The cv axles were bad so I changed them on both sides with all new wheel bearings. Now I'm looking at the front brakes and the 2 cylinders for the brake shoes on both sides do not work at all. I am also new at working on brakes so its a mystery to me what needs to be done to fix the cylinders.  Can somebody please help me with these brake issues? See the image below.
      Thank you,
      Olchap

    • T37Mark
      1998 Kawasaki Bayou 400 4x4 Electrical Issue (Neutral light intermittently turns on and off)
      By T37Mark
      HI everyone. New to this forum. I have 98 Kawasaki Bayou 400 with an apparent electrical issue. I have the Clymer manual, but I am not exactly sure where to start. The issue started a month ago and the neutral light would go on and off intermittently. Eventually it went completely off , and I thought it was a shifting issue. I took the case off and checked the clutch and all mechanical shifting components are good, so I think I eliminated that. The switch sometimes works, sometimes doesn't. Last time I tried, I did hear a clicking sound near where the battery is right before the light went out. Does anyone have any ideas where to start? Hoping this is an easy fix.
    • wjmedic
      2003 Polaris Sportsman 400 - Right front tire will not disengage from AWD
      By wjmedic
      Recently rebuilt front end on this Polaris 400. New axles, bearings, seals, control arm bushings, Hilliard clutch thoroughly cleaned and inspected with no damage noted. 
      Everything put back to together. Placed bike on jack stands all four wheels off the ground, started in 2 WD switched to AWD both front tires spinning, when AWD turned
      off right front wheel will not disengage from AWD. Checked voltage at connectors both left and right connectors have no voltage with AWD switch off, and both have 12.4V
      when AWD switch is turned on. Repeated turning switch on and off several times with no change in condition. I am thinking this must be something mechanical with the 
      Hilliard clutch on the right hub ie. weak spring or stuck rollers on the Hilliard clutch assembly (Is this a logical thought?) any ideas on trouble shooting this before I disassemble the 
      right front hub again 

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...