Quantcast
Jump to content


2001 Yamaha Warrior 350 - Wont Fire


shinyang

Recommended Posts

The first thing you want to do is check for bad connections, switches, wiring, or maybe a blown fuse. If you have a multimeter, you can trace power from the battery through all the paths of the ignition curcuits and find out if you are losing power somewhere. If you determine, that you have no problems with the circuitry, then you need to get ahold of a repair manual, whether you have to buy it, or if you know someone who has one that you can borrow. It will have testing procedures for your ignition components, these tests aren't always conclusive, but they can be a big help in finding the bad part. Much better than throwing money at it by purchasing parts that you may not need. Good luck.

Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...
  • 2 years later...
2 wires on coil- one is hot with the ignition ON, the other is the trigger wire. so one should be HOT and one COLD [off] If you don't have one hot one, head for the battery. does it turn over?

grab the link to that manual- it should help you a lot!

Let us know!

do you have a link for the manual was out riding went over a small snow jump and now it just turns over and wont start thanks for any help you can email me [email protected]

Edited by davidiz420
Link to comment
Share on other sites

do you have a link for the manual was out riding went over a small snow jump and now it just turns over and wont start thanks for any help

Sounds like mine. I have an 01 Warrior too. battery was dead so I jumped it figuring it would charge while I was riding. Took it out in the snow and the damn thing shut down and left me stuck in the woods in the middle of a snowstorm. It turns over, but wont fire. I am taking it to my mechanic as soon as I get my income tax return. It is way too cold for me to be playing hide and seek with an electrical problem. Good luck with yours. Warriors are awesome quads when they are running.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By HSTAR
      Hey I have a 1997 big bear 350 4x4
      I replaced the shifter shaft and the shift arm linkage and the rod when I installed them all I was unaware that you had to line the dot on the shifter shaft with the gap on the linkage arm gap put it all back  together and rode it I can't get it to shift in the right gears  I can move the shift cam by hand and goes in different gears but with the shifter shaft in it riding I can't put it in R or N 
      Anyone know how to line up the shifter shaft and the shift cam s
       
    • By Mhatayas
      My uncle bought a Baja 250, 2006. Knew there was no spark since the get go. He don't know anything about quads so is getting me to help him try to get it running...
       
      battery is bad so I connected battery charger to it to crank it over , cranks over well , but no spark .... 
      Lights and everything work fine , but with each crank over using the e start switch , the display reads 999 888 777 666 ... Right down to 000 and repeats itself . 
       
      He managed to get a parts bike , I changed over the CDI and the coil and the stator from the parts bike and there was another black box by the voltage regulator I changed over ... I used my multimeter to confirm as much as I could works , it's hard without knowing which wires are which , and I cannot find any diagrams online for this bike ? 
       
      Do you think it could be the Killswitch? There's so many wires coming from there I don't know where to start . Also I should mention it appears the fan on the front of the bike has been taken off (the wires have been cut too ) 
       
      If this bike sparked it would run . The previous owner said he parked it one day and it just wouldn't start after.
    • By John Sinclair
      I WANTED TO UPGRADE THE CARBURATOR ON MY 1992 BIG BEAR 350, SO I ORDERED A NEW CARB FROM EBAY.  ACCORDING TO THE WRITE-UP IT WAS A GOOD FIT FOR BIG BEARS FROM 1988 TO 1996.  WHEN I REMOVED MY ORIGINAL CARB I NOTICED THAT IT WAS DIFFERENT FROM THE NEW CARB MY CARB HAD TWO THROTTLE  CABLES THE NEW CARB ONLY HAD ONE CABLE.  HOW CAN I MAKE THIS CARB WORK ON MY TWO CABLE THROTTLE?  
    • By Clydaho
      2022 Sector 550, 414 miles on it and the gas gauge reads empty.  I topped off the gas and it didn't change.
      There is no fuse that I could find.  No access at the gauge cluster.
      Wiring on the top of the tank looks good, properly connected.
      Could the sending unit in the tank be stuck or broken?
      Has anybody removed the tank lid?  Any tricks?  
      Any other ideas?
      Thanks for any help,
      Clyde
    • By ethie
      Hi All
      I have a 2012 Coleman 500 Outfitter that keeps fouling out the plug within 10-15 minutes 
      not sure where to start
×
×
  • Create New...