Quantcast
Jump to content

Recommended Posts

Posted

Looking for a tire that would be good for trail riding at RAC in PA.

I would like to have the tires already mounted and looking for the best bang for the buck or nothing too aggressive.

Would the stealer be the most cost effective since I wouldnt have to pay for shipping?

I already have a set of maxxis razrs on there already and not too happy with them (plus less than half tread left)

Posted
Looking for a tire that would be good for trail riding at RAC in PA.

I would like to have the tires already mounted and looking for the best bang for the buck or nothing too aggressive.

Would the stealer be the most cost effective since I wouldnt have to pay for shipping?

I already have a set of maxxis razrs on there already and not too happy with them (plus less than half tread left)

Razr2 are the best tires $$ can by !! I run them on My 450R

Posted
so for riding sport quads on trails, the Holeshots or RAZR II are a sure bet just a matter of preference.

Thanks for your help guys!

Not just a matter of preference but experince on the trail !!

Posted
Ok the stealer said it would be about 300 for a set of razr2 plus 50 to mount them on my rims. Good price?

The hole shots where 90 a piece

Sent from my SGH-T959V using Tapatalk

Stay away from the dealerrships for tires :realmad:Look around on line or local craigslist ( Found a pair of Razr II on rims for 150.00 a few months ago ) and mounting for 50.00 is a ripoff !:yes:

Posted

Now I have a new question. the rear rims on my ex are factory 9x8.0 but physically measure 9x9. the offset measures 5"outside and 4"inside. Ive measured several times in different spots.

Which aftermarket size rim should I use to keep it as close to stock as possible. According to the mudthrowers wheel chart I have 9x9" rims. plus I have a 11" x 9" tire on there now. If so why are my rims marked 9x8.0 and did I measure the offset correctly?

If I go with an ITP t-9 in a 9x9, the closest offset they make is 3x6

If I go with a 9x8" rim the offset is closer at 3x5

The tires on there are Maxxis RAZRs 20" x 11" x 9".

The reason Im asking is RMATVMC is cheaper than the stealers here plus I would like to have an extra set of rims/tires if needed already mounted. AM I looking to much into this? If so please smack me

  • 3 weeks later...
Posted

OK so now before I go buying a set of tires... Yes another lengthy post... I would like to upgrade to 22" rear tires (20" now)

I plan on getting a renthat 14t front sprocket anyways so that would bring me back to almost factory gear ratio?

Should I go with a 13t instead to give it more low end grunt or 14th and what tooth for the rear?

Im learning damnit!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By jen
      Wow...I packed a small soft side cooler with an ice pack  at -4 F and inserted my Type K thermocouple sensor inside so I could monitor the temperature without opening.  After 3 hours  the inside temperature was 60  F...OMG!   The ice pack  was solid frozen.   Standard temperature for safe storage is < 40 F.     What I found by asking was that there should be no air space in the cooler.  Packed with Ice preferably ice from connivence store (normally 0 F of less).  Food should take up  short day trip1:1 ratio.
      Good coolers are expensive.
    • By mehim
      Hi everyone and thanks for reading. 
      My husband and me are getting ready to host the 2nd Quad Runners event at our nudist campground. The first one (last year) went pretty well with about 20 quads attending and have to say, it was a smaller group, but they made up for their size with the large interest in partying and there was plenty of nudity as the Saturday night went on. 
      We have decided to host another one this summer, but we are looking for some fun (but safe) riding events. Our grounds are almost all flat and remember we are a nudist campground so many of us are bare as* naked so "slow ride" events would be the best. 
      Give us your thoughts and ideas and feel free to ask us anything you would like, and we will answer right here in the thread. 
      Thanks for your help and ride safe. 
      BTW, let us know what "anything goes" means for this thread section. 

    • By logray
      Hi all, 

      I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear). 

    • By mikeexplorer
      We rode here the day before the event. This is a DCNR state forest trail system. The story behind the name is miners would put their bottles of whiskey in the local springs to keep them cold until their shift was over. Part of the trail system is on old strip mines so some areas are barren, others are full forest.
       











    • By quadnut20
      23 friends 5 days great weather in Wyoming riding Sand Dunes & trails !!











×
×
  • Create New...