Quantcast
Jump to content


Prairie update 3 hours later


Recommended Posts

Got my new seals today for the front diff. I hope to get them in soon and then it will be ready to ride. It would have been much easier if I would have changed them before I put the diff in But I took the guys word their was nothing wrong with the diff. Seals are no big deal!

Never let anyone tell you anything... Trust no one!

Sent from my SGH-T959V using Tapatalk

Link to comment
Share on other sites

Here is what happen today 1st seal good 2nd seal good 3rd seal "O" CRAP bearings and metal falling out. I dont understand how I was able to ride with this diff. Thank God the pinion gear was still in good shape I was able to use everything I needed from my diff with the combo I have a good working diff I still have to adjust the diff lock & my tail light/ blinker is not working. If I don't mess with painting the wheel & plastics it's DONE!!!!!!!! I rode it for about 20 to 30 mins.

Link to comment
Share on other sites

I went riding today and nothing fell off or broke I did for get to put 3 rubber sleves on the frame for the gas tank but their on now. Diff lock is still not working I'm going to have to take a little more time to adjust it & tail light still isn't working I'm going to try a new bulb. The bulb looks good but I tried 2 switches the 1 that came with the frame and my old one the brake light worked with my old 1 but nothing now is working. Other than that it's did good.

Link to comment
Share on other sites

I went riding today and nothing fell off or broke I did for get to put 3 rubber sleves on the frame for the gas tank but their on now. Diff lock is still not working I'm going to have to take a little more time to adjust it & tail light still isn't working I'm going to try a new bulb. The bulb looks good but I tried 2 switches the 1 that came with the frame and my old one the brake light worked with my old 1 but nothing now is working. Other than that it's did good.

Nice work !!Back in the saddle again !!:yes:

Link to comment
Share on other sites

Well heres the update for today. Some of you will know what I'm talking about remember the old cars every time the moved the suspension would squeak.My quad was doing the same thing it was as loud as the motor my wife heard me comming up the driveway & when I came in the house I got that question! What did you break? Nothing I just got it squeaky clean. So I took the a-arms off and greased the heck out of them. It was driving me crazy I cut my ride short. The grease worked & I got the diff lock working like it should today.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Werewolf
      Oil is getting in the air box from crankcase vent tube, I put the two hoses that go to the air box together then something started to smoke on the front of the engine. There is a filter? In the line I blew that out.
    • By NZrider
      My king quad 700 runs rough when cold then won't start some times but not often when it's hot. And occasionally smoke's a lot when it's cold I'm guessing that's rings but I'm worried unless it's causing the other problems
       
       
       
      All help is appreciated thanks
    • By jatho
      Has anyone else had an issue on older king quads where the oil would leak from the top of the head (due to a failed gasket) and drip onto the hot exhaust? Mine got so hot one time it caught fire. Just wondering if this is a common issue, as I've seen the same thing happen on multiple bikes that were the same model. 
    • By mkibbe
      My 2014 750 king quad stalls sometimes when I touch or turn the handlebars,the problem has gotten worse,my machine has 475 miles and is only trail ridden,I have a new factory battery and i have 14.2 volts when the quad is running and 13.3 on the battery when not running,also using a multimeter there is no change in volts when turning the bars until it does stall,If I pull the 40 amp power steering fuse it will not stall.......I've been told its the ECU,Hate to buy one if thats not the problem,but its kinda leaning towards that,,,,,need some opinions.

    • By jatho
      What is the best engine oil to use for the Suzuki King Quad - also any other tips and tricks I should know before doing an oil change on these bikes 



×
×
  • Create New...