Quantcast
Jump to content

Recommended Posts

Posted

well i went and bought my first sport quad. a 2002 honda TRX400EX quad for 600 bucks. it needs a new bearing carrier, tail light, battery box,battery, airbox lid, muffler, chain and 1 more set of brake pads. this is it i just got it home.

my questions are,

1. on the rear end of all the 400ex's on the left hand side i see a cyclinder type deal on the sub frame what is that since mine doesnt have it?

2. when i put an after market exhaust on here do i need to rejet? since all these pipes ive been looking at so no need to rejet blah blah blah

3. on the airbox theres a 2nd tube running from the box to the top of the motor what does that do and do i need it? since theres no filter on it so i didnt figure it did anything.

390113_10150607386132729_586052728_11811362_1092491032_n.jpg

390113_10150607386132729_586052728_11811362_1092491032_n.jpg.176fa4313762f6fa4cdf08fb279a18eb.jpg

Posted

the cylinder thing should be the stock tool container ...and yes you should rejet and the the tubes slould be the air intake tubes 1 should run up under the gas tank if i remember rite and the other i think is a vent that should go to the vent on the rear top of the motor case and there is a drain tube that is in the bottom of the air box that is to let and water out ...

Posted (edited)

The other hose that comes from the top ofthe motor that goes into the airbox takes motor fumes and blowby and reburns them. There should be a check valve but not 100% sure

As CK said a rejet is a must. No room for error on an air cooled. 400ex come from the factory lean so any additional air flow needs added fuel. Without it pinging or burnt valves can occur.

Sent from my SGH-T959V using Tapatalk

Edited by marioweldinginc
  • 2 weeks later...
Posted
well i went and bought my first sport quad. a 2002 honda TRX400EX quad for 600 bucks. it needs a new bearing carrier, tail light, battery box,battery, airbox lid, muffler, chain and 1 more set of brake pads. this is it i just got it home.

my questions are,

1. on the rear end of all the 400ex's on the left hand side i see a cyclinder type deal on the sub frame what is that since mine doesnt have it?

2. when i put an after market exhaust on here do i need to rejet? since all these pipes ive been looking at so no need to rejet blah blah blah

3. on the airbox theres a 2nd tube running from the box to the top of the motor what does that do and do i need it? since theres no filter on it so i didnt figure it did anything.

the round container you see is the fractory tool box the the tube you are talking about is a vent to releave the crank case pressure and recirulates the air back into the air intake boot alot of people will disconnect this and replce it with a small micro filter that can be bought at oreilys auto parts do not leave open drit and grimm will result in engine damage. it suggested to jet most carbs with after market pipes dealing with air/fuel and back pressure that is needed to make any motor to run.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By LMI
      Hi all.  New to the forum & quads.  Seems like a great place full of info.
      I just recently picked up a 2005 Suzuki KingQuad LTA700.  I need a battery.  I've been reading up on conventional vs AGM types.  I have a Royal Distributing and Canadian Tire.  RD has 2 types avail for my year/Model a battery YTX16-BS CRANK $75, and BATTERY YTX20CH-BS YUASA $140.  Neither of these is the type from the manual FTZ16-BS.
      from what I can tell... I think the only difference is the capacity with the $75 unit rated at 14 AH/10HR and the $140 unit rated at 18 AH/10HR ... which is the rating in the manual for the FTZ16-BS.  How much does this make a difference for nearly x2 the cost?
      And about the models/type numbers.... what is important to know ... they all end in "-BS" but are the other details relevant or just manufacturer naming?
    • By Yamahahahaha
      I'm in the middle of repairing damage from the chain coming off of this from the previous owner. (I learned this is somewhat common on these for various reasons.)
      What are you guys using to either help keep the chain correct and on the sprocket or guarding your engine in the case that it comes off / breaks?
      Is there an upgraded guard that can bolt around the sprocket in replacement of the currently broken OEM alluminum?

    • By TomJulio
      Looking for two stock front wheels for 92 TRX300 2WD.   I think they are 6 x11" size.     
    • By vaneleus
      I've been hunting for a rebuild kit or aftermarket replacement without success. Any tips? The OEM replacement is too rich for my blood. 
    • By gordonmacritchie
      on my honda trx 500 we have no power to the ignition switch for starting or ignition
      we have lights and horn working
      all fuses are fine
      have traced through the harness and cant find any broken wires or bad connections
      from what we have gathered so far the pgm fi unit is not sending any power to the fuel pump relay to power everything up.
      if we put power direct to the ignition switch plug then everything works but wth the key in the off position.
      does this sound like a faulty pgm fi unit?
×
×
  • Create New...