Quantcast
Jump to content

Recommended Posts

Posted (edited)

Not looking to spark any controversy or any arguments. :laugh:

I was thinking about this all day dont ask why.

Ive heard of guys complain about EFI in the new atvs and how carbs keep it simple. wouldnt want their efi module to go out 80 miles deep in the woods. - My 400ex has a carb

Now what about when a front axle actuator gets jammed or the electronics for it crap out. Now that 2 foot mud bog you had to travel through was a piece of cake in 4 wheel drive is now going to kick your as*. - my 400ex is 2 wheel drive. I wouldnt attempt it in the first place.

Coolant leak in the woods or a broken hose? - my 400ex is air cooled.

Melted and broke that CVT belt because you sucked up water into the CVT case? - My 400ex has a clutch.

whining that your 500 dollar instrument cluster isnt covered under warranty cuz you broke it. - My 400ex has a neutral light.

Got too deep and stuck in mud so out comes the winch. They make a 1500lb capacity winch for my 400ex too. plus it weighs only 8 lbs

Your atv is so heavy it needs power steering and wooopsy it breaks deep in the woods. My 400ex has conventional steering. They also make a steering damper and vibration dampening handlebars for it if it gets too rough.

You rolled your 900lb atv and cant get it over? my 400ex is only 375lbs

your starter crapped out? no pull start? my 400ex doesnt have a pull start either but I can push start mine.

Ive seen alot of people say they like to rough it in the woods. How is driving an ATV that is the equivalant of a Cadillac roughing it? Air Ride??? Really? you need an air suspension??

Ill stick with my trusty 03 400EX. Does it break? Yup, but it never left me stranded. Is it crude and optionless - big 10-4 but I dont care. Its simple and trail fast. add a cooler rack for storage and an atv winch and you can go almost anywhere a 4x4 can go. :biggrin:

Edited by marioweldinginc
  • 2 weeks later...
Posted

I look at it this way. Buy the quad that fits most of your needs. If I was a big hunter I would not own my z400. If I like to ride sand dunes and enjoyed jumping and racing on dirt roads and was light enough for my wife to be able to move around the quad, then my z400 would be for me. There is not one quad that will do every thing great. For me the Suzuki fits what I do the most.

  • 2 weeks later...
Posted

well i like my V-force 700 on most of the riding i do .. it doesnt have a chain to ware out and the rear breakd are sealed and dont ware out like the 400ex and it sits higher and has alot more power and is auto so you dont have to worry about if your in the rite gear ... and its only about 100lbs more than the 400ex .. you should try 1 there mario ... you would prolly park your 400ex an never look back...lol

Posted (edited)

I found an new '09 in riverhead. I am going take atrip out there this weekend.

That doesnt mean ill go ahead and get a lazy mans quad BUT the reviews are very high so..

I like the fact that they kept it somewhat light. It is 2 wheel drive but that is quite a large motor

Sent from my SGH-T959V using Tapatalk

Edited by marioweldinginc
Posted
well i like my V-force 700 on most of the riding i do .. it doesnt have a chain to ware out and the rear breakd are sealed and dont ware out like the 400ex and it sits higher and has alot more power and is auto so you dont have to worry about if your in the rite gear ... and its only about 100lbs more than the 400ex .. you should try 1 there mario ... you would prolly park your 400ex an never look back...lol

I have to admit my chain problems stemed from an inferior product and a sprocket change. The factory chain was still on there and worked perfectly.As for rear brakes the 400ex seems to be notorious for eating rear pads but again if my rear brakes go out it wont leave me stranded like a broken cvt belt or if i broke a radiator hose.

I would like to know if anyone has or carries a deadman anchor?

Sent from my SGH-T959V using Tapatalk

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By 88bigbear
      Bought a 88 big bear 350 4x4 took it for a run and lost spark, found it was stator so I replaced that then took it for a long run and it sat for 2 days and no spark again, this time stator tests good on ohms and voltage for source and pick up coils so I started replacing things including regulator, ignition, ignition coil and plug cap, spark plug and everything tests great including all safety switches until the orange wire for ignition coil from the cdi it only reads 3 volts so I replaced the cdi and still 3 volts, any ideas??
    • By cfherrman
      Fixing for a friend. Atv was at a different friends house to be fixed and he rebuilt the carb and had it running nice, then it shut off and no more. He replaced the key and the coil.
       
      So he got busy, so I am helping, I checked the wiring from the stator to the cdi, and from the cdi to the coil. All is good. I checked resistance on the pickup coil, good, and on the source coil, open. I buy a new stator (China) and the 4 prong plug only has 3 wires in it while mine has all 4. I checked resistance in the source coil and it's in the 300's. I pulled one of the old pickup wires out of the old stator and wire it in the new one. Still no spark.
       
      Why do the wires differ, I checked the VIN again and it's "J" for the year and I got a 1988 stator. Please help!
    • By LashinWheeler
      Hello all, I have a 2006 Polaris Sawtooth with no spark. It has a dead battery but with a jump pack on it, it will still not Spark. Plug is good, Throttle ETC is not closed, Stator pick up coil seems to Ohm out in the correct range, Unsure how to properly check the CDI. And when ignition is on the Neutral and reverse light come on but after cranking just the neutral stays on. 
       
      Any help would be great,
       
      Thanks!
    • By mehim
      Hi everyone and thanks for reading. 
      My husband and me are getting ready to host the 2nd Quad Runners event at our nudist campground. The first one (last year) went pretty well with about 20 quads attending and have to say, it was a smaller group, but they made up for their size with the large interest in partying and there was plenty of nudity as the Saturday night went on. 
      We have decided to host another one this summer, but we are looking for some fun (but safe) riding events. Our grounds are almost all flat and remember we are a nudist campground so many of us are bare as* naked so "slow ride" events would be the best. 
      Give us your thoughts and ideas and feel free to ask us anything you would like, and we will answer right here in the thread. 
      Thanks for your help and ride safe. 
      BTW, let us know what "anything goes" means for this thread section. 

    • By logray
      Hi all, 

      I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear). 

×
×
  • Create New...