Quantcast
Jump to content

Recommended Posts

Posted

Hoping someone can help point me in the right direction . Engine starts and runs but only with the choke on fully.when you open the choke the motor wants to die and you have to keep giving it gas and it starts to back fire.Went through the carb. once but that doesn't mean I didn't miss something .so if someone could point me in the right direction.Thanks

Posted

If you went thru and cleaned the carb maybe it is something else. Did the diaphram seat properly?

Either not enough fuel or too much air. Check the intake boot from the airbox to the carb and make sure it is secure and not cracked. Some people spray a mist of starter fluid around the carb while it is running and see if the rpms change.

Posted

Just rechecked the boot between the carb. and air box. Sure enough there is a small tear ,will order new part and go through the carb. again and repost hopefully this was the problem.Now I just have to wait by the mail box.

Posted

No still waiting for replacement parts.I had to order the parts on line.Local dealers don't seem to carry alot of parts inventory.But then again thats alot of money sitting on the shelf.

Posted
No still waiting for replacement parts.I had to order the parts on line.Local dealers don't seem to carry alot of parts inventory.But then again thats alot of money sitting on the shelf.

Good luck, keep us posted!

Posted

Update.Replaced boot between carb. and air box replaced pilot jet screw recleaned the carb.meaning I disassembled everything cleaned with carb. cleaner and compressed air. Runs good now .thanks for your ideas.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By ATVNetwork
      As the 2025 ATV Motocross National Championship Series (ATVMX), an AMA National Championship, got underway with back-to-back Florida AMA Pro only events, it was evident that Phoenix Racing Yamaha’s Joel Hetrick picked up where he left off last season.View the full article
    • By Dumass
      My name says it all. I have a '03 Honda Sporttrax 400EX with a new aftermarket carb on it that seems to be having issues. I can start it but it idles really rough and when I give it throttle it just kills the engine. I have tried adjusting the idle screw but to no avail. I am in the San Diego Ca area. 
      Any advice will be greatly appreciated. I would also like to get an owners manual for the thing too but can't seem to find a downloadable one.
    • By Trent Finnessey
      So I’ve got a 2000 Honda 400ex absolutely love it!! I’ve had it for about a month, I ride with bruteforce 750’s, outlander 850’s and 1000 sxs’s and I was thinking of getting a trx450r carb and a full hmf exhaust. And probably doing the air box mod too, how much power would this give my 400? Just a little different or a big difference? Cuz if it’s not much of a different I’ll just stick with my dg slip on..... thanks!
    • By P_syko
      I’m brand new to 4 wheelers and just bought a 1987 Yamaha Moto 4 350. It has good compression and fuel, but no spark. I’ve looked high and low trying to find how to test all the components of the ignition system, but can’t find anything. This has a new CDI box on it, but I suspect it might be the stator. How do I test the stator on this? Any help would be greatly appreciated! 
    • By DPDISXR4Ti
      I hadn't driven my Kodiak for a two months, and since it was low on fuel, the first thing I did was filled it up to maybe 7/8 full. Getting ready to start it, I rotated the fuel selector switch to "on" and within seconds I smelled and saw fuel dripping onto the floor. I quickly turned it off and the fuel gradually stopped - I can repeat this.
      The fuel is flowing from the hose that is connected to the bottom of the carb, and routes around to the left side toward the wheel well. Any idea what's going on here? It ran fine the last time I had it out.
      Thanks...
×
×
  • Create New...