Quantcast
Jump to content


drag races u have won!!!


jerod400ex

Recommended Posts

wat have u guys beat with ur quad???................. i have beat an 08 400ex with a yoshi exhaust and rejetted, an 07 400ex with hmf performance pipe rejetted, yamaha dirt bike 125

4-stroke, a honda 100 dirt bike 4-stroke, outlaw 525 with stock pipe with baffle out and rejetted, 300ex with mods,and a couple of other good quads....... my 400ex has white bros exhaust and rest is stock.... let me here wat u guys have beat?:laugh:

Link to comment
Share on other sites

I out ran a kazuma falcon 110 with my daughters e-ton 90 two stroke. The other week my friend came over with another buddy of his and we went riding during the ride the buddy was talking how he could keep up with me and thought his 07 Honda 400 or 4 something 2wd utility quad was as fast as my prairie 650. I hurt his feelings did I not only out run him I also climb a few hills in 2wd he couldn't make it 1/2 way up. His is one of those sideways motor shaft drive Hondas. Then I took down my friends grizz 600

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By HSTAR
      Hey I have a 1997 big bear 350 4x4
      I replaced the shifter shaft and the shift arm linkage and the rod when I installed them all I was unaware that you had to line the dot on the shifter shaft with the gap on the linkage arm gap put it all back  together and rode it I can't get it to shift in the right gears  I can move the shift cam by hand and goes in different gears but with the shifter shaft in it riding I can't put it in R or N 
      Anyone know how to line up the shifter shaft and the shift cam s
       
    • By ResQ91
      Hi guys
      My 87 Bear 350 won't start and could use a hand.
      Turn key on and Oil light turns on and then slowly fades out. (I think this is key to this) No start, not even a tick.
      battery and connections good
      A Solenoid post jump turns it over
      Neutral Safety Switch wire attached and seems good
      It has not had a wire/switch on Rear Brake Pedal ever since I had it.
      Any thoughts on some other things to troubleshoot this??
    • By NZrider
      My king quad 700 runs rough when cold then won't start some times but not often when it's hot. And occasionally smoke's a lot when it's cold I'm guessing that's rings but I'm worried unless it's causing the other problems
       
       
       
      All help is appreciated thanks
    • By jatho
      Has anyone else had an issue on older king quads where the oil would leak from the top of the head (due to a failed gasket) and drip onto the hot exhaust? Mine got so hot one time it caught fire. Just wondering if this is a common issue, as I've seen the same thing happen on multiple bikes that were the same model. 
    • By mkibbe
      My 2014 750 king quad stalls sometimes when I touch or turn the handlebars,the problem has gotten worse,my machine has 475 miles and is only trail ridden,I have a new factory battery and i have 14.2 volts when the quad is running and 13.3 on the battery when not running,also using a multimeter there is no change in volts when turning the bars until it does stall,If I pull the 40 amp power steering fuse it will not stall.......I've been told its the ECU,Hate to buy one if thats not the problem,but its kinda leaning towards that,,,,,need some opinions.




×
×
  • Create New...