Quantcast
Jump to content

Recommended Posts

Posted

I replaced the starter on my ATV and had to remove the secondary driven clutch assembly to remove a couple of the bolts. The unit came off easily but now I cant get it to slide all the way down the shaft to engage the spines on the shaft so that I can bolt it back up. What am I doing wrong? Is there a "trick" to it or a tool that is needed?

Posted

thoes can be hard 2 put on... you might have to get a longer bolt and tighten it very slowly to get it to go down to the splines... but you have to be very careful doing it or you can damage the shaft an threds an the splines ... use some lube also...

Posted

Not a chance.. More like my 400ex pulling out polaris 4x4s

Remember friends dont let friends ride polaris

Actually i could care less as long as your out there riding and enjoying your atv it could be a 200 dingdong motors quad and id still respect you in the morning :thumbup::D

Sent from my SGH-T959V using Tapatalk

Posted
I replaced the starter on my ATV and had to remove the secondary driven clutch assembly to remove a couple of the bolts. The unit came off easily but now I cant get it to slide all the way down the shaft to engage the spines on the shaft so that I can bolt it back up. What am I doing wrong? Is there a "trick" to it or a tool that is needed?

Don't be shy when putting it back on keep rotating the clutch and pushing it on. When the splines line up it should go about 3/4 of the way on then just make sure you use an impact and the proper torque to make sure you have it on all the way. Also use red loctite on the nut, I have seen some of the clutch nuts work their way free on other bikes. I am working on my clutch today changing over to a winter belt for plowing, I'll take some pics.

Posted

Thanx for the info swampcat07. Headed to the hardware store now to get a longer bolt.

marioweldinginc please get off of your mommy and daddys computer and go back to playing with your hot wheels and power rangers. When your parents find out youve been playing on grown up sites again they're gonna block your online fan membership to Hanna Montana.

Posted
thanx for the info swampcat07. Headed to the hardware store now to get a longer bolt.

Marioweldinginc please get off of your mommy and daddys computer and go back to playing with your hot wheels and power rangers. When your parents find out youve been playing on grown up sites again they're gonna block your online fan membership to hanna montana.

:laugh:

Posted
Don't be shy when putting it back on keep rotating the clutch and pushing it on. When the splines line up it should go about 3/4 of the way on then just make sure you use an impact and the proper torque to make sure you have it on all the way. Also use red loctite on the nut, I have seen some of the clutch nuts work their way free on other bikes. I am working on my clutch today changing over to a winter belt for plowing, I'll take some pics.

Swampcat07 using the longer bolt worked like a charm! Now that its all back together it runs like a scalded ape forward but bogs down in reverse. Any suggestions!

Posted
Thanx for the info swampcat07. Headed to the hardware store now to get a longer bolt.

marioweldinginc please get off of your mommy and daddys computer and go back to playing with your hot wheels and power rangers. When your parents find out youve been playing on grown up sites again they're gonna block your online fan membership to Hanna Montana.

My hot wheels will still have to winch out your polaris sir

Sent from my SGH-T959V using Tapatalk

Posted (edited)

wow... i cannot believe this thread. a new member looking for help with his quad and all hell breaks loose with another member. my god, the drama.... tsk tsk

not a good way to start the new year :no:

Edited by oxidized_black
Posted
Swampcat07 using the longer bolt worked like a charm! Now that its all back together it runs like a scalded ape forward but bogs down in reverse. Any suggestions!

No problem I know the AC clutches are not exactly the same so it sounds like the longer bolt is the fix. My quad has a reverse rev limiter, maybe its that. I can overide it by having it in 4WD and pushing an overide button. I almost flipped it when I did that though. Does it sound detuned/missing when WOT in reverse?

Posted

Swampcat that's it exactly..... Sounds and runs like heck in reverse. I'm pretty sure it's going to be the reverse limiter and will confirm in the morning and post my findings.

Posted

Oxidized black. It's ok my ride is fixed and my frustration level is now lower so pokin back at mario is kinda humorous. (I guess I should tell him about having to pull a buddy's Honda Rancher across a mud hole because the weight of my buddy and a 225 pound hog on the Rancher was just to much for the Honda ). I appreciate the backup!!! Y'all all have a good evening!

Posted

Mario has a temporary allergic reaction to latex and that is why he acts this way sometimes......his eyes bug out of his head and he foams at the mouth also during this time...don't take it personally,,,,he's just Mario and we luv him that way:laugh:

Posted
Oxidized black. It's ok my ride is fixed and my frustration level is now lower so pokin back at mario is kinda humorous. (I guess I should tell him about having to pull a buddy's Honda Rancher across a mud hole because the weight of my buddy and a 225 pound hog on the Rancher was just to much for the Honda ). I appreciate the backup!!! Y'all all have a good evening!

So was there a Honda pulling the Polaris pulling Honda giggity

Sent from my SGH-T959V using Tapatalk

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By RadRob
      I am new to this site. I have a 1987 Suzuki LT230S Quadsport I think. Is there a difference between quadsport and quadrunner?
    • By Coyote251
      I'm trying to help a buddy out with his bike (he's not really on the internet or familiar with these forums) and I'll admit that I am not super familiar with the transmission and clutches in these bikes. I owned a Brute a few years ago, but never had an issue like this that I had to troubleshoot.
      So basically my buddy bought a group lot of 650's to build one good bike out of. He got it all put together and has it running but when he pushes on the throttle the clutch doesn't engage till the RPM's are quite high and even when its moving it doesn't really speed up, almost seems like its in "limp mode". He's tried 2 different transmissions so I don't think that's the problem. 
      Is there any adjustment on the clutch engagement? Anything else I can tell him to look at? Let me know if you need anymore information if you think you can help.  
    • By Gwbarm
      Does anyone have a recommendation of a really Heavy Duty ATV cover. I have bought several and they do keep the water off somewhat, but they are very thin and do not contour with the shape very well and water pools up in the rack louvers. I think i may be looking for a heavy canvas one, if anyone has a recommendation it would be greatly appreciated.
    • By AnthonyT
      In search of my first ATV? What are good older 4x4 models?
    • By Mikey69
      Heres my story. Kinda long. I guess I was a late bloomer when it comes to quads. I had never ridden a quad in my life. Rode Dirt Bikes as a kid growing up. Back in Oct of '06 I found a Mustang on craigslist. Took it for a test drive one morning before work. Fast car. 351 Cleveland. I had planned on meeting the guy again after work. For some strange reason thats still to this day beyond me, I stopped in Hillsboro MotoSports on the way home from work. I had 6 Grand on me. There was a left over '05 sitting by the front door. It was on sale for $4999. It was $5499 OTD. I didnt even look at anything else. I knew nothing about quads accept I thought it really looked coool and I had the money in my pocket to buy it. I was sitting on it when the salesman walked up and asked... "Can I help you?" Without hestitation I pulled 60 Ben Franklins outta my front pocket and said "I want this Quad. Load it up in my truck." It was just about dark by the time I drove away from the shop. BTW, I didnt bother to ask my ol lady if I could buy it. LOL. Anyway, I took it by the house and showed her. She was kinda stunned but not mad. We drove over to a friend of mines house and unloaded it. I took it to the field across the street from his house. HOLY CHIT!!!!! I was surprised by the power. I had it for about 2 weeks and took it to Sand Lake. I was there a few hours and rolled it on a banked turn at the top of the bowl right before you get to the one-ways. When it rolled, I flew off and landed on my belly. The quad came bouncing and landed on my back. For a month I couldnt even walk. I was scared of it. I considered trading it for a 250EX. Went back to the shop. The salesman said..."Dude!!! You dont want a 250EX!!! Trust me. Just get used to it" I still wasnt convinced. I put it on craigslist for $4000. Calls were coming in. I had a guy that wanted to come look at it that evening. I decided to take it for one last ride at Browns Camp before I sold it. I was still afraid of it. After about 5 minutes I started feeling comfortable on it again. I decided right then, I loved my Honda 450 and would learn how to ride it instead of selling it. That was late Nov of '06. Work was slow for a Painter in Oregon. My new job everyday? Going to Browns Camp and ridding my Quad. I bought my Girl Friend an '02 Blaster. I rode my 450 for 4-6 hours almost every single day for 3 months. And yes, I know my way around Browns Camp pretty well. LOL. In March I bought her an '06 TRX250EX (Thank God I didnt trade my 450 for one of those) LOL Since then, I have become totally addicted to quads. I love them. Couldnt imagine not owning at least one quad. Luckily I have two. My "07 was $6500 OTD in July of '07. Bought it for my Girlfriend. Traded in her 250 EX. A month later we broke up. So, I wound up with two Honda 450's.
       
×
×
  • Create New...