Quantcast
Jump to content

400ex axle swap with 250r

jerod400ex

By jerod400ex
in Honda ATV Forum

 Share

Recommended Posts

jerod400ex Community Regular

jerod400ex

Posted
Posted

:skeptic: ok guys i am runnnin into problems with my ex the splines on the axle are wearing out and i cant keep the hubs tight anymore they just keep getting looser.... im tryin to get some advantages here so i heard the 250r is interchangeble with the ex is this tru?? and if so is the axle and hubs combined gonna be shorter or longer cause i dont want it shorter..... need to know any advantages and disadvantages of this change...

Help is apreciated:yes:

marioweldinginc Veteran

marioweldinginc

Posted
Posted (edited)

Why wont you put in another 400 axle? From what ive read the splines are different on the hub areas. Most 250r riders seemed to be putting 400ex axles on their bikes.

Sent from my SGH-T959V using Xparent Blue Tapatalk

Edited by marioweldinginc
jerod400ex Community Regular

jerod400ex

Posted
  • Author
Posted
Why wont you put in another 400 axle? From what ive read the splines are different on the hub areas. Most 250r riders seemed to be putting 400ex axles on their bikes.

Sent from my SGH-T959V using Xparent Blue Tapatalk

i thought bout puttin a 250 axle in because i can get it cheaper and im kinda low on funds right now..... if i can find a cheaper 400 axle i will get it

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Forum Topics

    • Cj Winds
      2009 Honda Rancher TRX420FA with shifting problems
      By Cj Winds
      I have a 2009 Honda Rancher TRX420FA with shifting problems.
      Usually it shifts ok when cold but after couple minutes it will stop shifting with no codes.
      The 1st shift clutch oil pressure when in first gear is 74psi. The 2nd shift clutch oil pressure when in second gear is 74psi.
      The 1st shift clutch oil pressure when in neutral is zero. The problem is when the tranny is in neutral the 2nd shift clutch pressure starts around 10-15psi and builds to 20psi. Is this normal?
    • Jason39
      Choke problems 2000 Suzuki quadrunner 500
      By Jason39
      I’m having a issue with my choke when its on it runs fine when I cut the choke off the atv cuts off went to take the carburetor off and saw the choke plunger broke at the nut to screw it in could this be my issue? Do I just need to buy a plunger kit and put it on? I took the carburetor off and cleaned both jets anyway just to make sure and it’s still having issues staying on
         
    • austinfuller22
      e start problems
      By austinfuller22
      i have a lt 230 and the e start isnt working but i dont know why
      can i have some help
    • Tim Keiper
      2 problems with 2000 Timberwolf 4x4
      By Tim Keiper
      1st problem, Does anyone know where I can find a stock carb for my Timberwolf, I have tried two different aftermarket carbs and they both suck. The machine runs great until it gets good and warm, then it keeps stalling unless I feather the throttle. it will even stall while I'm trying to go from 1st to reverse or vise versa. I took it to a buddy of mine who is a bike mechanic for years, and he told me try to find a factory carb. When I look online from dealers it says "NOT AVAILABLE" anyone have any suggestions ?
       
      2nd, The small tab on the rear axle for towing is to short for even pulling my small yard trailer, I can't even turn a little bit and hit hits. I tried making an extension which worked great as far as length, but it bends the tab and then the extension drags the ground. I have an idea of what to do to fix it, but wanted to see if anyone else has had this problem and see how you solved it.
    • Gwbarm
      1986 TRX 250 Starter Bypass Gear Problems
      By Gwbarm
      I finally got around to working on the TRX, this has been an ongoing problem with this machine. This is a machine that we keep on my Fathers property, i dont see it that often, my brother haad it professionally repaired last year and year before same problem, the new starter gears and bypass gears last about a year and the machine is not used that often, he said he was done with it , so i thought i should go take a look. Sure enough the gears were all malled again. 
       

       

      IMG_4910.mov   There is some slack in there but most is taken up by the gear cover,if anyone with history with these machines has had the same problem, let me know your findings. Where i am now im looking for finding replacement honda gears on Ebay and try those. I suspect the original was replaced with aftermarket gears years ago and they just worse quality as the years go by. 

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...