Quantcast
Jump to content


Help! 1992 Suzuki Quadrunner 250 - Starting Itself ?


Jaybyrd32

Recommended Posts

New to site, inherited a 92 quadrunner 250 2wd. After riding turned switch to off, took key out, and it was trying to start itself somehow???? One day I shut it off and an hour later I came out to the garage to it running with the key out and in the off position, and run switch in off.... What's going on with this thing? Help

Link to comment
Share on other sites

I had a starter soliniod short out once after I got out of a truck. I made it to the house and realized I forgot my lunch box. I turned around to get my lunch box and the truck was coming down the drive way after me. Needless to say I was surprized. I jumped in put the truck in neutral and ran to the garage to get tools to disconnect the battery. On another truck I turned my truck off and it kept running. The parts going to the ignition switch fell apart in the steering colume. I agree it sounds like you have some bare wires/shorted out some place or in the ignition switch.

Link to comment
Share on other sites

I had a starter soliniod short out once after I got out of a truck. I made it to the house and realized I forgot my lunch box. I turned around to get my lunch box and the truck was coming down the drive way after me. Needless to say I was surprized. I jumped in put the truck in neutral and ran to the garage to get tools to disconnect the battery. On another truck I turned my truck off and it kept running. The parts going to the ignition switch fell apart in the steering colume. I agree it sounds like you have some bare wires/shorted out some place or in the ignition switch.

I`m with OX check your switch something sounds weird !!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By newguy024
      Just got into ATV riding just last week, never had much money so i couldnt afford to buy anthing, so now at the age of 34 i just bought a 1987 suzuki quadrunner 300 for 500$ took it out a few times and what a rush of excitement to go through that first mudhole haha!
    • By justent_88
      Hello, im looking for some input on this situation i have. My 94 Mojave has no spark, and i have no idea what it is. Ive replaced/tested the magneto, the pickup coil, cdi, the ignition coil. Even the key and Killswitch. I haven't tested the harness its self, but i have tried another harness and still nothing. The only thing i can think of is the fly wheel itself. I have found a lot of metal shavings in the fly wheel and have cleaned it the best I could. But nothing happened afterwards. I am truly stumped here and hoping some of yous could shed some knowledge/ideas that could help get this thing to fire. 
    • By Mhatayas
      What should I do about this , bad oil leak where the filter cover bolts on . Can I use some gasket maker 

    • By Mhatayas
      My uncle bought a Baja 250, 2006. Knew there was no spark since the get go. He don't know anything about quads so is getting me to help him try to get it running...
       
      battery is bad so I connected battery charger to it to crank it over , cranks over well , but no spark .... 
      Lights and everything work fine , but with each crank over using the e start switch , the display reads 999 888 777 666 ... Right down to 000 and repeats itself . 
       
      He managed to get a parts bike , I changed over the CDI and the coil and the stator from the parts bike and there was another black box by the voltage regulator I changed over ... I used my multimeter to confirm as much as I could works , it's hard without knowing which wires are which , and I cannot find any diagrams online for this bike ? 
       
      Do you think it could be the Killswitch? There's so many wires coming from there I don't know where to start . Also I should mention it appears the fan on the front of the bike has been taken off (the wires have been cut too ) 
       
      If this bike sparked it would run . The previous owner said he parked it one day and it just wouldn't start after.
    • By McG75
      Sorry I suck at these forums so if you see this submitted under update status, my bad. Anyhow this is a new shock for a 96 Yamaha Kodiak 400 4x4 it fits my 96 Yamaha Timberwolf 250 4x4 perfectly. Little narrower are the bottom than the original but everything else is perfect. I extended it to almost a half in from full extension because I’m pushing 350 pounds.  It rides and hold me well. So if any of y'allRace driven shock. have been looking for one and didn’t want to do the research here it is. 





×
×
  • Create New...