Quantcast
Jump to content

going to go insane !!!

GREENIE

By GREENIE
in General ATV Discussion

 Share

Recommended Posts

GREENIE Proficient

GREENIE

Posted
Posted

im still trying to get my chain on my raptor. i ve been trying to get the master link on my chain the last couple days . i got it shortened to the right length and got the out side plate to snap on . no i m just trying to get the snap ring on. the first one broke in half. the second one snaped off and flew across my shed somewhere. and i had one more and got it ,sat down to put on and it MIA . have no idea where it went to. i m going to pull my hair out soon. i got all my other parts on but that. i just want to get it done so i can ride. :aargh:

quadnut20 Grand Master

quadnut20

Posted
Posted
im still trying to get my chain on my raptor. i ve been trying to get the master link on my chain the last couple days . i got it shortened to the right length and got the out side plate to snap on . no i m just trying to get the snap ring on. the first one broke in half. the second one snaped off and flew across my shed somewhere. and i had one more and got it ,sat down to put on and it MIA . have no idea where it went to. i m going to pull my hair out soon. i got all my other parts on but that. i just want to get it done so i can ride. :aargh:

Masterlinks can be a bi*** at times !!:yes:Ive had good luck lately !!

jerod400ex Community Regular

jerod400ex

Posted
Posted
im still trying to get my chain on my raptor. i ve been trying to get the master link on my chain the last couple days . i got it shortened to the right length and got the out side plate to snap on . no i m just trying to get the snap ring on. the first one broke in half. the second one snaped off and flew across my shed somewhere. and i had one more and got it ,sat down to put on and it MIA . have no idea where it went to. i m going to pull my hair out soon. i got all my other parts on but that. i just want to get it done so i can ride. :aargh:

i feel sory for ya man:frown:..... i had the exact same problem with my 400ex wen it was time to put a chain on it...:yes:

GREENIE Proficient

GREENIE

Posted
  • Author
Posted

Well i finally got it on. went out and it took a whole 5 minutes. the snap ring went right on no problem at all. i don t understand how i could struggle so much one time and the next its easy as that. going to go for a test ride after work today. so hopefully everything holds together. And also 2 seconds after i got the new snap ring on i bought i found the one that went MIA on me. thats how it works sometimes i guess.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • Yamahahahaha
      Chain guard solution 1987 Quadrunner LT230E
      By Yamahahahaha
      I'm in the middle of repairing damage from the chain coming off of this from the previous owner. (I learned this is somewhat common on these for various reasons.)
      What are you guys using to either help keep the chain correct and on the sprocket or guarding your engine in the case that it comes off / breaks?
      Is there an upgraded guard that can bolt around the sprocket in replacement of the currently broken OEM alluminum?

    • Gtc4d
      need help on a yamaha raptor 80 stalling
      By Gtc4d
      I recently purchased a raptor 80 for my grandson for  christmas. I am trying to make sure it is running properly. i have rebuilt the carb and adjusted the carb idle then the mixture to middle of where it runs rough and it runs great for about a min or 2. then it stalls out. I can usually choke it and it will start so i feel it is lacking fuel. the fuel shutoff valve has been changed and i checked it for good fuel flow.  any ideas of what to check next. I am planning to vfy fuel float height tomorrow. I visually checked it by turning carb upside down when i had it apart and it looked level. any ideas are appreciated. 
       
      Thanks.
      Todd
    • P_syko
      Shaft drive vs chain drive?
      By P_syko
      Which is more reliable? Shaft or chain drive? 
    • BillR94
      1998 Polaris Magnum 425 starts but dies right away.
      By BillR94
      I picked up this ATV that had no spark. The previous owner said he was driving it and it died and would not start. He discovered it had no spark. He replaced the CDI and the coil with no luck. He got tired of it and I bought it. I replaced the stater and now it has strong spark. Now, it starts for a second or two then dies. It will not stay running. I have checked the timing and it is spot on. The valves are adjusted correctly. I see no warn issues with the cam. I put the original CDI and coil back on it. Same problem exists. Compression is at 65 psi (has decompression mechanism),
      I took off the muffler in case the issue was clogged pipes. No change. I replaced the spark plug. No change. The carb was an aftermarket so I put a Niche carb on with no change. I bypassed the fuel pump and that did nothing to solve the problem. 
      I don't know if this is a carb issue or an ignition issue. I am looking around locally for an OEM carb to try out but not sure that will fix the problem. 
      Can anyone help me solve this problem. I am running out of ideas. 
      Thank you for your time
      Bill
       
    • jordan_ATV
      Raptor Pre-ignition?? (Maybe)
      By jordan_ATV
      I got a 2005 350 Raptor Special Edition and I'm dealing with a no start issue; the weirdest thing is when I'm cranking it fires and slows down showing signs of pre firing, smoke shoots out the carburetor every time it sparks. every electrical part (CDI, Rectifier, Stator, Coil) has been swapped out from previous owner, the top end of the engines all new and I cleaned the carb out, anyone got any ideas or similar problems, also is it possible to have a bad spark timing

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...