Quantcast
Jump to content

Recommended Posts

Posted (edited)

Could use some thoughts /help with this one PLEASE!!!

When I depress the starter button (with the key turned on neutral lite on and oil light on) the quad does not start that is no juice gets to starter to engage it. BUT the elelectric at the consol cuts out/shuts off -lites neutral lite and oil lights go out AND the starter relay makes a funny sound and vibrates if you hold it. Then if I shut the key off and wait a minute or so and then turn the key back on the electric/juice comes back on. I am 100% sure jucie is getting to the starter relay in question the fuse is OK-does not blow out

It appears it's resetting itself????? I am thinking that the starter relay --the unit next to the battery where 1 wire comes from the battery and the other goes to the starter is shot?????????????????????????

I would take it to a shop but they are relativley far away and I'd have to leave the quad and then go back for it- time consuming and expensive I am sure?????

SOOOOOOOOOOOOOOO could I PLEASE hear from the crowd on this????

Thanks ever so much- Elder statesman- BOB

Edited by hojnowsr
Posted
Could use some thoughts /help with this one PLEASE!!!

When I depress the starter button (with the key turned on neutral lite on and oil light on) the quad does not start that is no juice gets to starter to engage it. BUT the elelectric at the consol cuts out/shuts off -lites neutral lite and oil lights go out AND the starter relay makes a funny sound and vibrates if you hold it. Then if I shut the key off and wait a minute or so and then turn the key back on the electric/juice comes back on. I am 100% sure jucie is getting to the starter relay in question the fuse is OK-does not blow out

It appears it's resetting itself????? I am thinking that the starter relay --the unit next to the battery where 1 wire comes from the battery and the other goes to the starter is shot?????????????????????????

I would take it to a shop but they are relativley far away and I'd have to leave the quad and then go back for it- time consuming and expensive I am sure?????

SOOOOOOOOOOOOOOO could I PLEASE hear from the crowd on this????

Thanks ever so much- Elder statesman- BOB

my opinion on this you have it figured out. another thing i would possibly check would be your relay and if the bike has a belt light i would check it to see if mabey it is resetting itself i used to have a kawasaki 750 bruteforce that done this exact same ended up being belt lite needed to be reset from factory. but also mine wouldnt run very strong as it was i could get the bike to fire though.

Posted

Oxidized Black BINGO after all the several electrical items I fixed /or replaced-which were shot, the last item causing a problem was a bad connection at the battery--YOU WERE RIGHT-TX

quad starting up A-OK

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By HoldenBoy
      Hi all,
      Looking for some help on a starter/bendix issue. Can Am outlander 450 2017. While cranking to start, the starter spins and engages into the ring gear. After a few seconds the bendix retracts while still spinning and there is no damaged teeth on the drive pulley.
    • By Brent Wright
      What's a good size to start a 10 year old on?
×
×
  • Create New...